Epson RS-232 Projector User Manual


  Open as PDF
of 4
 
Follow these instructions to set up the Epson PowerLite
Pro Cinema projector and HQV Video Processor
1. Unpack the projector and video processor. Attach the serial number sticker included with
the video processor to the User Manual for that product.
2. Choose a location for the projector as described in the projector User’s Guide.
3. Connect an HDMI cable from the video processor to the projector.
4. If you want the video processor to be able to turn the projector on or off, connect an
9-pin, null-modem RS-232 cable from the video processor to the projector.
5. Plug in the power cord for the video processor. Make sure batteries are installed in the
video processor remote control.
6. Turn on the power switch on the back of the video processor (above the AC power inlet).
Installer Guide
®®
HDMI OUT
Video processor
Projector
RS-232 (SLAVE)
next