Filter
Top Products
Standard Interface Modules
EPSON
Universal Serial Bus
Modules
* Be sure to use the DM connector on the USB module and use an EPSON
DM-D series display.
Inch values are approximate.
To find out more about our line of Connect-It Interfaces talk to your EPSON Sales Representative.
Specifications are subject to change without notice.
Conforms to OLE POS specifications.
There are two different USB boards to meet your needs
UB-U01II
Includes one upstream connection, a USB hub that has two
downstream connections and a DM connector
UB-U02II Includes one upstream connection and a DM connector
UB-U01II and UB-U02II Specifications
Speed
12 Mbps
Power Self-powered function device
Bus Current
0mA
Connector USB Upstream port connector (USB Type-B connector)
DM Port
Connector
(8-pin modular connector)
EMI Standards
FCC Class A, CE Marking, VCCI Class A, AS/NZS 3548
Class B
Operating
System
Windows
98 Second Edition
Drivers
WDM USB Driver, USB Port Monitor, OPOS Driver
for USB
Cabling
Standard USB cables can be extended to 3 meters
{9 ft. 10 in.} as per the USB specification
DM Port*
Type RS-232
Speed 19200 bps
Power distribution DC24 V, less than 350 mA
The following specifications apply to the UB-U01II module, in
addition to the specifications listed to the left
Hub Specifications
Power Bus-powered HUB device
Power distribution 100 mA per each downstream port
Number of downstream ports 2 ports
Hub controller current 100 mA
Attachment of other USB hubs
Only self-powered hubs may be connected
to the USB module
Connector
USB Downstream port connector
(USB Type-A connector, 2 ports)
Epson America, Inc. • 3840 Kilroy Airport Way • Long Beach, CA 90806 • Product Purchase Referral Line: (562) 290-5304
© 2001 Epson America, Inc. EPSON and ESC/POS are registered trademarks of Seiko Epson Corporation. Connect-It and QuickPass are trademarks of Epson America, Inc.
All other trademarks are the property of their respective companies. EPSON is a member of the OPOS committee.
!$
SD-USBA