![](http://pdfasset.owneriq.net/1/79/179275c2-871b-4eec-a757-d8c6c751633e/179275c2-871b-4eec-a757-d8c6c751633e-bg17.png)
23
Setting Up the Printer | 23
3. Insert the strut into the left side as shown. (The sides are labeled L and
R.)
4. Fasten the strut with 3 bolts as shown. Use the hex wrench to tighten the
bolts.
Note: Make sure you
tighten all bolts before
moving to the next
section.