Filter
Top Products
5
repacked defective printer will be picked up by a
carrier designated by Epson. If the defective
product is not prepared for return within seven
business days of receipt of the replacement
printer, the customer will be invoiced at the then
current manufacturer’s suggested retail price for
the replacement printer. It is your responsibility to
unpack, re-install optional components (interface
cards, auto take-up reel unit, etc.), and set up the
exchange printer at your location.
What This Warranty Does Not Cover
This warranty does not cover:
1. Service of the print head or any other part of
the ink delivery system, if the printer is ever
used with new or refilled ink cartridges, inks,
or ink delivery systems other than the Epson
UltraChrome DS system for which the printer
was designed. In case of such use, coverage
of the print head and ink delivery system
under this limited warranty is immediately
terminated.
2. Any damage caused by neglecting or
improperly performing user-level
maintenance as documented in the Epson
SureColor F9200 User’s Guide. The user-
level maintenance includes the following
items:
a. Perform periodic nozzle checks and
nozzle cleanings to prevent ink buildup
around the print head and cap unit area
as needed.
b. Clean the platen, pressure roller, and
media holding plate (recommended: daily,
or as needed when there is media dust
buildup).
c. Check and replace the wiper, and wiper
cleaner parts - included as part of the
maintenance kit.
d. Check and clean the print head, wiper,
wiper cleaner, caps, heat shield, and
wiper rail.
e. Properly discharge the waste ink as
needed.
f. If the printer is not being used and is
turned off, turn the printer on at least
every two weeks.
g. If the printer will be turned off for over two
weeks, maintenance must be performed
by a service technician before the printer
is turned off. When the printer is returned
to use, service maintenance must be
performed again before the printer is
turned on.
h. If the ink is cold let it warm to room
temperature before using (recommended:
4 hours or more).
i. Apply carriage rod grease when a
message appears on the control panel.
j. Do not touch the green IC chip on the
chip unit.
k. Stir the Black ink once every week.
Note: See the Maintenance section of your
user's guide for in-depth maintenance
instruction to best maintain your investment.
3. Any damage caused by third-party software,
applications, parts, components or peripheral
devices added to the product after its
shipment from Epson (for example, dealer or
user-added boards, components, or cables).