Filter
Top Products
Installation
➤ Unpacking the printer Please open the printer package and check that all the following items are included.
If anyitem ismissing ordamaged,pleasecontact thestorewhere
the product was purchased.
Remove the transport protection elements as described in the
unpacking instructions.
The carton and the packing materials will be necessary for
moving or transporting the printer. Please store them in a safe
place.
➤ Positioning your
printer
Place the printer on a stable, flat and non-slip surface in such a way that it cannot fall down.
Ensure easy access to the control panel and the paper feeders and leave sufficient space for the
paper ejected.
If frequent forward and return feed movements will be perfor-
med with fanfold paper, you should position the printer as
illustrated in the figure.
Whenchoosinga suitableplace foryour printer,you shouldalso
observe the following:
■ Avoid exposing the printer to direct sunlight. If you cannot
avoid placing the unit near a window, protect it from sunlight
with a curtain.
■ Position the printer near the computer to which it will be
connected. The distance must not exceed 2 m.
■ Ensure sufficient distance from radiators.
■ Ensure that the printer is not exposed to extreme variations
in temperature or air humidity. Avoid exposure to dust.
Printer
Ink-ribbon
Operator’s Manual
Power Cord
CD-ROM
Never place the printer near sources of easily in-
flammable gas or explosive substances.
STOP
Unpacking Instructions
ENGLISH
Quick start-up Installation
5