Filter
Top Products
2-2 Using the Printer
Indicator lights
The control panel lights provide information on printer conditions.
POWER (Green)
The POWER light is on when the printer power is on.
RECEIPT OUT (Red)
This light is on when the roll paper is at the end or near the end.
This light flashes in the following cases. When it flashes, press the
FEED button.
❏ In the self-test standby state
VALIDATION (Green)
The light is on when validation paper is inserted and the printer is
ready to print. The light flashes when the printer is in the
validation insertion/removal waiting state.
ERROR (Red)
This light is on when the printer is off line (except during paper
feed using the FEED button and during the self-test). It flashes to
indicate an error condition.
The flashing pattern shown below indicates that the temperature of
the print head is too high. The printer recovers automatically and
resumes printing when the head cools.
Approximately 160 ms