Filter
Top Products
Fine-Tuning the Projector 69
Restoring the Default Settings
You can use the Reset option on any menu to restore the
factory-default settings for the settings in that menu.
To restore all the projector settings to their factory-default values,
select the
Reset menu, highlight Reset All, press Enter, and select
Yes to confirm.
Adjusting the Image
You can use the Image menu to adjust the brightness, sharpness, color,
tint, contrast, and
Auto Iris settings.
1. Press the
Menu button on the projector or remote control and
select the
Image menu. You see a screen similar to one of these:
note
When you select Reset All
in the Reset menu, it does
not reset the Input Signal,
User’s Logo, Language, or
Lamp Hours settings.
note
If you are using the HDMI
port (EX5200/EX7200
only), you see the menu on
the left if the signal is digital
RGB video, or the menu on
the right if the signal is
component video.
Component video/ Composite video/
S-Video
* EX5200/EX7200 only
Computer/USB display/ RGB video/
USB
*