Filter
Top Products
6. Use the arrow buttons on the projector or the remote control to select the corner or side of the image
you want to adjust. Then press Enter.
7. Press the arrow buttons to adjust the image shape as necessary.
8. When you are finished, press Esc.
Parent topic: Image Shape
Related references
Projector Feature Settings - Settings Menu
Related tasks
Displaying a Test Pattern
Correcting Image Shape with Point Correction
You can use the projector's Point Correction feature to adjust the image via points on a grid.
1. Press the Menu button.
2. Select the Settings menu and press Enter.
3. Select the Geometric Correction setting and press Enter.
4. Select the Point Correction setting and press Enter.
Note: If you see a confirmation message to continue, press Enter again.
You see this screen:
5. Select the number of grid lines to display and press Enter.
88