Filter
Top Products
Setting Options Description
Projection Front Selects the way the projector
faces the screen so the image is
Front/Ceiling
oriented correctly
Rear
Rear Ceiling
Operation — See the last table in the topic
A/V Settings A/V Output Selects various audio and video
output settings
Monitor Out
A/V Output: select this setting to
Audio Settings
output audio and video to an
external device when the
projector is in standby mode
(Standby Mode must be turned
on to use this setting)
Monitor Out: Select the image
source to output to an external
device when the projector is in
standby mode. When set to
Auto, an analog RGB signal from
the Computer or BNC port is
output depending on which
source was selected when the
projector went into standby
mode.
Audio Settings: Selects audio
source to output
Standby Mode Communication On Enable this setting to allow the
following operations to occur
Communication Off
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an
external device (A/V Output
must be set to Always On)
131