Filter
Top Products
26
Using the control functions
Carrying out control using control buttons
Click the icon of a projector to be controlled in "Grouping view" or "Detail
list view", and click a control button to enable control of only that selected
projector.
You can also enable control of all selected projectors by selecting more
than one projector in "Grouping view" or "Detail list view" and clicking a
control button. The methods of selecting more than one projector at the
same time are as follow.
• If you select a group icon in "Grouping view", all projectors that have
been registered in that group and that are set to be monitored can be
controlled at the same time.
• Hold down the [Ctrl] key on the keyboard while clicking on the desired
icons.
• Use drag and drop to select a range of desired icons.
The following table shows the meanings of the control buttons.
Control buttons
Power On
Turns the projector power on.
Power Off
Turns the projector power off.
Switch source
Computer 1
Switches the input source to the [Computer1] port
or [Computer] port.
Switch source
Computer 2
Switches the input source to the [Computer2] port.
Switch source
BNC
Switches the input source to the [BNC] port.
Switch source
S-Video
Switches the input source to the [S-Video] port.
Switch source
Video(RCA)
Switches the input source to the [Video] port or the
[Video 2] port.
Switch source
Video(BNC)
Switches the input source to the [Video1] port.
Switch source
DVI, HDMI
Switches the input source to the [DVI] port or
[HDMI] port.
Switch source
D-Video
Switches the input source to the [D4] port.
Switch source
EasyMP
Switches to EasyMP or EasyMP.net.