Filter
Top Products
Using the control functions
33
You can select projectors and right-click on them to select Web control
even when the following are being displayed.
Group properties s p.28
Warning and Error Projector list (Control operations can only be carried
out for projectors with a warning status.) s p.27
Carrying out control using timer settings
This is useful for carrying out certain control operations such as turning
a projector's power on and off at specified times every day or every week.
Timer settings can be carried out either for a single projector only, or all
at once for all projectors in a group.
Procedure
Select "Timer" - "Timer Settings" from the Tool menu.
The following window will be displayed and you can then check the timer
setting status.
The line colors in the Timers list have the following meanings:
The details that can be checked and operations that can be carried out at
this time are given below.
Current day's timer setting
When some of the projectors in the group have timer setting
enabled and others have it disabled for the current day's timer
setting
When the current day's timer setting is a disabled setting
Timer setting for a day other than the current day
Projectors Selects a group or projector to check the status of.
When a group is selected, the timer setting statuses for all
projectors in that group are displayed.
Date Shows the current day in a red box.
Days for which timer settings have been made are shown
in bold.
Click or to switch to the calendar for the previous
or next month.
Timers Shows a list of the timer settings.
Enabled/disab
led
Switches the timer settings that have been selected from
the timer list between enabled and disabled.
Add Registers new timer settings. s "Procedures for new
timer settings" p.34
Edit Lets you change the timer settings that have been
selected from the timer list. If a group has been selected
for status checking, the settings cannot be changed.
Delete Lets you delete timer settings that have been selected
from the timer list.