Filter
Top Products
Settings Menu
66
* Not available on PowerLite Pro Z8150NL
Power Consumption
*
You can set the lamp brightness to Normal 1, ECO, or Normal 2.
Normal 1: Projects at normal brightness.
You can change the lamp brightness in Multi-Projection - Brightness Level from the Extended menu. s p.67
ECO: Select this if the images being projected are too bright such as when projecting images in a dark room or onto a small screen.
When ECO is selected, the amount of electricity consumed and the fan rotation noise during projection are reduced, and the lamp's
operating life is extended.
Normal 2: Adjusts the brightness automatically according to the surrounding environment.
Remote Receiver You can limit the reception of the operation signal from the remote control.
When you want to prohibit operation by remote control, or if the remote receiver has a fluorescent light too close to it, you can
make settings to deactivate the remote receiver you do not want to use or that is experiencing interference.
If the [Menu] button on the remote control is pressed for 15 seconds, this parameter will return to the default setting.
User Button You can assign selected items from the configuration menu to the remote control's [User] button. By pressing the [User] button, the
assigned menu item selection/adjustment screen is displayed, allowing you to make one-touch settings/adjustments. You can
assign one of the following items to the [User] button.
Power Consumption
*
, Info, Progressive, Test Pattern, Multi-screen, Resolution, Memory
Test Pattern When the projector is setup, a Test Pattern is displayed so that you can adjust the projection without connecting other equipment.
s p.157
Memory Load Memory: Recalls the settings saved in Save Memory. s p.52
You cannot select if nothing is registered by Save Memory.
Save Memory: Saves image related settings in the configuration menu to memory. s p.51
Erase Memory: Deletes unnecessary memories. s p.52
Rename Memory: Changes the name of the saved memory. s p.52
Reset You can reset all adjustment values on the Settings menu to their default settings, except for User Button and Memory.
To return all menu items to their default settings, see s p.91
Sub Menu Function