Filter
Top Products
Fixed Wireless Terminal: G32 & G36 57
Ringing Signals
Ring Signal functionality
Activation of the ring signal functionality according the following condi-
tions:
•
Disabled for all incoming calls
•
Enabled for all incoming calls
•
Enabled only for voice calls
•
Enabled only for fax calls
•
Enabled only for data calls
•
Enabled only for fax and data calls
As default “Enabled, all incoming calls” is selected
Ringing signal sequence
This provides the possibility of setting different ringing sequences de-
pending on the incoming call’s nature. By default the four possibilities
are set to be the same as when receiving a regular voice call. The four
different ringing types are defined on the line parameters setting stored
in the FWT during the manufacturing stage.
Ringing signal defined
Ringing signal used for regular incoming voice call.
Line 2 ringing signal defined sequence
Ringing signal used for ALS (Alternate Line Service) activated and calls
to line 2.
Fax ringing signal defined sequence
Ringing signal used for incoming fax call.