Ericsson W2x Series Network Card User Manual


 
221 02-FGB 101 327 Uen C – December 2006 15
Text Type Function
10-28
VDC
Circular
Standard power inlet for connecting the included
power supply adapter.
Reset Switch
A small hole in the housing. Used to restore the
unit to its factory default configuration.
USB 2 x USB-A
USB connectors, for connecting USB devices to
the unit, e.g. printer or mass storage.
LAN 1-4 4 x RJ45
Ethernet LAN connectors for connecting the unit
to client PCs or an Ethernet switch/hub.
2.7.2 W25 Connectors
The Ericsson W25 is equipped with the following connectors located at the
bottom of the unit:
Text Type Function
10-28
VDC
Circular
Standard power inlet for connecting the included
power supply adapter.
Reset Switch
A small hole in the housing. Used to restore the
unit to its factory default configuration.
USB 2 x USB-A
USB connectors, for connecting USB devices to
the unit, e.g. printer or mass storage.
Phone RJ11
Phone connector for connecting a standard
analog phone.
Phone/
Fax
RJ11
Phone connector for connecting a standard
analog phone or fax. This port is dedicated for fax
connection.
LAN 4 x RJ45
Ethernet LAN connectors for connecting the unit
to client PCs or an Ethernet switch/hub.
2.8 LED Indicators
The front panel of the W2x terminals include the LED indicators as
described below.