Filter
Top Products
– 9 – ETAsys.com
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800-321-6699 • Fax: 800-996-3821
ETA-ECM30
30A AC Power Module Spike Suppressor
WIRING THE ETA-ECM30 CONTROL MODULE
The ETA-ECM30 is designed to be inserted in the ECM-RACEWY1, ECM-RACEWY3, or ECM-RACEWY6 housing. The specific job
(install) AC power requirements and power distribution layout will dictate how the ECM modules are wired into the housing. The
ETA-ECM30 Module can be wired as a single 30A run or in a parallel (loop thru) configuration. Each ECM module has dual 3-position
screwterminalblocksthatareinparallelandareclearlylabeledasfollow:E-Green=Ground,L-Black=Load,N-White=Neutral.Use
a minimum of 10 gauge wire for a 30A rating. Follow all local electrical codes. All installation must be done by a certified electrician.
Secure Wire via
Screw Terminal
AC Loop Thru
White
Black
Green