Filter
Top Products
EVGA X58 SLI Motherboard
41
Press Enter to auto-detect IDE and SATA channels in the system. Once the
channel is detected, the values for Capacity, Cylinder, Heads, Precomp, Landing
Zone, and Sector are automatically filled in.
None
There is no HDD installed or set.
Auto
The system can auto-detect the hard disk when booting up.
Manual
When you set the channel to [Manual] and change Access Mode to [CHS],
you can then enter the number of cylinders, heads, Precomp, landing zone,
and sector. You can manually enter the values or you can press Enter to
display a window that tells you the min and max values.
The BIOS supports the following HDD
Access Modes:
CHS
For HDD less than 528 MB.
LBA
For HDD greater than 528 MB and
supporting LBA (Logical Block
Addressing).
Large
For HDD greater than 528 MB but not supporting LBA.
Auto
Recommended mode.
IDE HDD Auto-Detect [Press Enter]
SATA 0 [Manual}
Access Mode [CHS]
Capacity 0 MB
Cylinder .....0
Head [ 0]
Precomp [ 0]
Landing Zone [ 0]
Sector [ 0]
Cylinder
Min= 0
Max=65535
Key in a DEC number :
:Move ENTER:Accept ESC:Abort
Press ENTER to display sub-menu
or enter number manually