Filter
Top Products
Enter BIOS Setup
The BIOS is the communication bridge between hardware and software.
Correctly setting the BIOS parameters is critical to maintain optimal system
performance and stability.
Use the following procedure to verify/change BIOS settings.
3. Power on the computer.
4. Press the Del key when the following message briefly displays at the bottom
of the screen during the Power On Self Test (POST).
Press F2 to Load Defaults, DEL to enter Setup.
Pressing Del takes you to the AMI BIOS CMOS Setup Utility.
Main Menu
The main menu allows you to select from the list of setup functions and two
exit choices. Use the + and - keys to scroll through the options or press Enter
to display the associated submenu. Use the arrow keys to position the
selector in the option you choose. To go back to the previous menu, press Esc.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends
Hardware Health Configure
Frequency/Voltage Control
Load Optimal Defaults
Discard Changes
Save & Exit Setup
Discard Changes and Exit
Configure Time and Date. Display System Information...
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
Standard BIOS Features
Advanced BIOS Features
Advanced Chipset Features
PCI/PNP Resource Management
Boot Configuration Features
Power Management Features
: Move Enter:Select +/-/:Valve F10:Save ESC:Exit F1: General Help
F7:Previous Values F9: Optimized Defaults