Filter
Top Products
EVGA | 26
IEEE1394a (Firewire)
The IEEE 1394a expansion cable bracket is provided in the box but if you do
not require the additional external connections, you do not need to install it.
1. Secure the bracket to either the front or rear panel of the system case (not
all system cases are equipped with the front panel option).
2. Connect the end of the cable(s) to the IEEE1394a headers on the
motherboard.
Table 3. IEEE 1394a Connector Pins
Connector Pin Signal
IEEE 1394a Connector
10
8
6
4
2
9
7
5
3
1
1 TPA+
2 TPA-
3 GND
4 GND
5 TPB+
6 TPB-
7 +12V
8 +12V
9 Empty
10 GND
Card
Edge