Filter
Top Products
58
Memory Feature
Select Memory Feature from the Frequency/Voltage Control menu and press
Enter to display the Memory Feature menu.
Figure 12. Memory Feature Menu
Memory Control Setting
This function is allows you to select the Memory Control Setting.
Memory Frequency
This function is allows you to select the Memory Frequency. The options are
Auto, 800Mhz, 1067Mhz, 1333Mhz, and 1600Mhz.
Channel Interleave Setting
This function is allows you to select the Channel Interleave Setting. The
options are 1 way, 2 way, 3 way, 4 way, 5 way and 6 way.
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F7: Defaults
Memory SPD [Standard]
Memory Control Setting [Disabled]
Memory Frequency [Auto]
Target Memory Frequency 1600MHz
Channel Interleave Setting [6 way]
Rank Interleave Setting [4 way]
Memory Low Gap [Auto]
Parameters Setting Current
tCL Setting [Auto] 8
tRCD Setting [Auto] 8
tRP Setting [Auto] 8
tRAS Setting [Auto] 19
tRFC Setting [Auto] 59
Command Rate [Auto] 1T
tRRD Setting [Auto] 4
tFAW Setting [Auto] 20
tRTP Setting [Auto] 4
tWR Setting [Auto] 8
Item Help
Main Level `
`
Phoenix ± AwardBIOS CMOS Setup Utility
Memory Feature