Extron electronic 64 Plus Series Switch User Manual


 
1-3
Extron CrossPoint 450 Plus 64 Series • Specications
Control/remote — switcher
Serial control port �������������������������� 1 RS-232 or RS-422, 9-pin female D connector (rear panel)
1 RS-232-only 2�5 mm phone jack (front panel)
Baud rate and protocol
9-pin D connector �������������� 9600 (default), 19200, 38400, 115200 baud (adjustable); 8 data bits, 1 stop bit, no
parity
2�5 mm phone jack ������������ 9600 baud; 8 data bits, 1 stop bit, no parity
Serial control pin configurations
9-pin D connector �������������� RS-232: 2 = TX, 3 = RX, 5 = GND
RS-422: 2 = TX-, 3 = RX-, 5 = GND, 7 = RX+, 8 = Tx+
2�5 mm phone jack ������������ Tip = TX, ring = Rx, sleeve = GND
Ethernet control port��������������������� 1 RJ-45 female connector
Ethernet data rate ������������������������� 10/100Base-T, half/full duplex with autodetect
Ethernet protocol ��������������������������� ARP, DHCP, ICMP (ping), TCP/IP, Telnet, HTTP
Program control ����������������������������� Extron’s control/configuration program for Windows
®
Extron’s Simple Instruction Set (SIS
)
Microsoft
®
Internet Explorer, Telnet
General
Power ���������������������������������������������� 100 VAC to 240 VAC, 50/60 Hz, internal, primary and redundant
(64 or 48) x (32, 48, or 64) wideband: 110 watts at 115 VAC, 60 Hz
32 x (48 or 64) wideband: 50 watts at 115 VAC, 60 Hz
(64 x 64) sync: 65 watts at 115 VAC, 60 Hz
A redundant power supply is standard.
Temperature/humidity ���������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling ������������������������������������������� Convection, vents on right and left sides
Rack mount ������������������������������������ Yes, with included parts
Enclosure type ������������������������������ Metal
Enclosure dimensions ������������������� 10�5" H x 17�0" W x 14�1" D (6U high, full rack wide)
26�7 cm H x 43�2 cm W x 35�8 cm D
Product weight per BME
32 x 48 through 64 x 64 Series wideband video BMEs
18�0 lbs (8�2 kg)
32 x 48 through 64 x 64 Series sync BMEs
17�0 lbs (7�7 kg)
Shipping weight per BME
32 x 48 through 64 x 64 Series wideband video BMEs
30 lbs (14 kg)
32 x 48 through 64 x 64 Series sync BMEs
29 lbs (13 kg)
DIM weight, international, per BME
44 lbs (20 kg)
An RGBHV system is shipped as 5 BMEs in 5 cartons.
Vibration ���������������������������������������� ISTA 1A in carton (International Safe Transit Association)
Regulatory compliances
Safety ����������������������������������� CE, CUL, UL
EMI/EMC �������������������������� CE, C-tick, FCC Class A, ICES, VCCI
MTBF ����������������������������������������������� 30,000 hours
Warranty ���������������������������������������� 3 years parts and labor
All nominal levels are at ±10%.
Specifications are subject to change without notice.
(7.6-101408-D6)