Filter
Top Products
CSVEQ 100 D • Specications and Parts
A-3
Sync
Standards ........................................ NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio
Gain ................................................. Unbalanced output: 0 dB; balanced output:
+6 dB
Frequency response
...................... 20 Hz to 20 kHz, ±0.5 dB
THD + Noise .................................. 0.03% @ 1 kHz at nominal level
S/N .................................................. >90 dB at maximum output (unweighted)
Stereo channel separation ............ >80 dB @ 1 kHz
Output cable driving distance ..... Up to 1000' (300 m) with Extron STP cable
Audio input
Number/signal type ..................... 1 stereo unbalanced
Connectors ..................................... 2 female RCA
Impedance ...................................... 18k ohms unbalanced, DC coupled
Nominal level ................................ -10 dBV (316 mVrms)
Maximum level .............................. +8 dBV, unbalanced at 1% THD+N
N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type ..................... 1 stereo or dual mono (jumper-selectable),
balanced/unbalanced
Connectors
..................................... (1) 3.5 mm direct insertion captive screw
connector, 5 pole
Impedance
...................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ....................................... ±0.5 dB channel to channel
Nominal level ................................ -10 dBV, unbalanced; -2 dBu, balanced
Maximum level ............................. +9 dBV, unbalanced; +17 dBu, balanced at
1% THD+N with a 10k ohm load
General
External power supply ................. 100 VAC to 240 VAC, 50/60 Hz, external;
to 12 VDC, 2 A, regulated
Power input requirements ........... 12 VDC, 0.2 A