Filter
Top Products
www.extron.com
© 2008 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.
USA West
+1.714.491.1500 / +800.633.9876
+1.714.491.1517 FAX
USA East
+1.919.863.1794 / +800.633.9876
+1.919.863.1797 FAX
China
+86.21.3760.1568 / +400.883.1568
+86.21.3760.1566 FAX
Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Europe
+31.33.453.4040 / +800.3987.6673
+31.33.453.4050 FAX
Dubai
+971.4.2991800
+971.4.2991880 FAX
Asia
+65.6383.4400 / +800.7339.8766
+65.6383.4664 FAX
www.extron.com
© 2008 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.
USA West
+1.714.491.1500 / +800.633.9876
+1.714.491.1517 FAX
USA East
+1.919.863.1794 / +800.633.9876
+1.919.863.1797 FAX
China
+86.21.3760.1568 / +400.883.1568
+86.21.3760.1566 FAX
Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Europe
+31.33.453.4040 / +800.3987.6673
+31.33.453.4050 FAX
Dubai
+971.4.2991800
+971.4.2991880 FAX
Asia
+65.6383.4400 / +800.7339.8766
+65.6383.4664 FAX
CVEQ Series
line Drivers
AuDio outPut
Number/signal type
CVEQ1 AAP, CVEQ1 WM,
CVEQ 100
......................... 1 stereo, balanced/unbalanced
CVEQ 100 D
....................... 1 stereo or dual mono (switch-selectable), balanced/unbalanced
Connectors
CVEQ1, CVEQ 100 Series
........ (1) 3.5 mm captive screw connector, 5 pole
CVEQ1 AAP
........................ (1) 3.5 mm direct insertion captive screw connector, 5 pole
Impedance ........................ 50 ohms unbalanced, 100 ohms balanced
Nominal level
CVEQ1 AAP, CVEQ1 WM
......... -2 dBu (632 mV), balanced output
CVEQ 100 Series
.................. -10 dBV (316 mVrms), unbalanced; -2 dBu (632 mV), balanced output
Maximum level
CVEQ1 AAP, CVEQ1 WM
Maximum level (Hi-Z)
...... >+16 dBu, balanced at 1% THD+N
Maximum level (600 ohm)
>+9 dBm, balanced at 1% THD+N
CVEQ 100 Series
............ +9 dBV (2.8 V) unbalanced, +17 dBu (5.6 V) balanced at 1% THD+N with a 10k
ohm load
GenerAL
External power supply ......... 100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 12 VDC, 1 A (max.),
regulated
Power input requirements
CVEQ1 AAP, CVEQ1 WM
......... 12 VDC, 0.4 A
CVEQ 100 Series
.................. 12 VDC, 0.2 A
Temperature/humidity .......... Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling ............................ Convection, unvented
Rack mount
CVEQ 100
......................... Yes, with optional 1U rack shelf, part #60-190-01 or 60-604-01; or 1U, 6” deep
rack shelf, part #60-190-10 or 60-604-10; or VersaTools
®
3” deep rack shelf,
part #60-190-20 or 60-604-20.
Also furniture and projector mountable with optional mounting kits.
All other models
................... No, but wall- and furniture mountable.
Enclosure type
CVEQ 100, CVEQ1 AAP,
CVEQ1 WM
........................ Metal
CVEQ 100 D
....................... Metal rear enclosure, plastic faceplate
Enclosure dimensions
CVEQ1 AAP
Plate .......................... 1.4” H x 3.5” W x 0.1” D
( 2.8 cm H x 8.9 cm W x 0.3 cm D)
(double space high AAP plate)
Circuit board
................ 1.1” H x 2.7” W x 1.7” D
(2.8 cm H x 6.9 cm W x 4.3 cm D)
(Height includes connectors, but not cables.)
CVEQ1 WM
Plate .......................... 4.5” H x 2.8” W x 0.1” D
(11.4 cm H x 7.1 cm W x 0.3 cm D) (1 gang)
Circuit board
................ 2.7” H x 1.1” W x 1.7” D
(6.9 cm H x 2.8 cm W x 4.3 cm D)
(Width includes connectors, but not cables.)
CVEQ 100
......................... 1.0” H x 4.3” W x 3.0” D (<1U high, quarter rack wide)
2.5 cm H x 11.0 cm W x 7.6 cm D
(Depth excludes connectors. )
CVEQ 100 D
Faceplate .................... 2.6” H* x 1.3” W x 0.1” D (6.6 cm H* x 3.3 cm W x 0.3 cm D)
(Fits the opening in a 1 gang Decora faceplate. *Height is 3.8” [9.7 cm]
including mounting tabs.)
Device
....................... 2.7” H x 1.8” W x 0.75” D (6.9 cm H x 4.6 cm W x 1.9 cm D)
(Depth excludes connectors, height excludes mounting tabs.)
Product weight
CVEQ1 AAP, CVEQ 100 D
........ 0.2 lbs (0.1 kg)
CVEQ1 WM
........................ 0.3 lbs (0.1 kg)
CVEQ 100
.......................... 0.7 lbs (0.3 kg)
Shipping weight
CVEQ 100 D, CVEQ1 AAP
........ 2 lbs (1 kg)
CVEQ 100, CVEQ1 WM
.......... 3 lbs (2 kg)
Vibration .......................... ISTA 1A in carton (International Safe Transit Association)
Listings ............................ UL, CUL
Compliances
CVEQ1 AAP, CVEQ1 WM
......... CE, FCC Class A
CVEQ 100 Series
.................. CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF .............................. 30,000 hours
Warranty .......................... 3 years parts and labor
NOTE: All nominal levels are at ±10%. Specifications are subject to change without notice.
sPeCifiCAtions
viDeo
Gain
CVEQ1 AAP, CVEQ1 WM
......... -6 dB to +6 dB, adjustable: 0.5 V to 2.0 V ±10% with input at 1 volt
CVEQ 100 Series
.................. Composite video and Y of S-video: -1 dB to +3 dB (x0.9 to x1.4), adjustable
C of S-video: 0dB to +10 dB (x1 to x3), adjustable
Equalization
CVEQ1 AAP, CVEQ1 WM
......... 4.5 dB max. @ 8 MHz
CVEQ 100 Series
.................. 0 dB to +7 dB (x1 to x2) at 5 MHz, adjustable
Bandwidth (Y of S-video) ...... 185 MHz (-3 dB)
Differential phase error
(CVEQ1 AAP, CVEQ1 WM) ....... 1º at 3.58 MHz
Differential gain error
(CVEQ1 AAP, CVEQ1 WM) ....... 0.07% at 3.58 MHz
Output cable driving distance
(CVEQ 100 Series) ............... Up to 1000’ (300 m) with Extron MHR cable
viDeo inPut
Number/signal type ............. 1 composite video
Connectors
CVEQ1 AAP, CVEQ1 WM,
CVEQ 100
.......................... 1 female BNC
CVEQ 100 D
....................... 1 female RCA
Nominal level .................... 1 Vp-p for composite video (including sync)
Minimum/maximum levels
CVEQ1 AAP, CVEQ1 WM
......... Analog: 0.3 V to 2.0 Vp-p with no offset at unity gain
CVEQ 100, CVEQ 100 D
......... 0.4 to 2.0 Vp-p with no offset at unity gain
Impedance ........................ 75 ohms
Return loss
CVEQ1 AAP, CVEQ1 WM
......... <-30 dB @ 5 MHz
CVEQ 100 Series
.................. <-25 dB @ 0 to 5 MHz
DC offset (max. allowable)..... 4.0 V
Input coupling .................... AC
viDeo outPut
Number/signal type ............. 1 equalized composite video
Connectors ....................... 1 female BNC
Nominal level .................... 1 Vp-p for composite video (including sync) at unity gain
Minimum/maximum levels
CVEQ1 AAP, CVEQ1 WM
......... 0.3 V to 2.0 Vp-p
CVEQ 100 Series
.................. 0.4 to 2.0 Vp-p (follows input)
Impedance ........................ 75 ohms
Return loss ....................... -30 dB @ 5 MHz
DC offset
CVEQ1 AAP, CVEQ1 WM
......... ±50 mV with input at 0 offset
CVEQ 100 Series
.................. ±5 mV with no input signal
Floating: +0.1 to -0.6 V, depending on input signal content
synC
Standards ......................... NTSC 3.58, NTSC 4.43, PAL, SECAM
AuDio
Gain ................................ Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response
CVEQ1 AAP, CVEQ1 WM
......... 20 Hz to 20 kHz, ±0.5 dB
CVEQ 100 Series
.................. 20 Hz to 20 kHz, +0.05 dB, -0.0 dB
THD + Noise
CVEQ1 AAP, CVEQ1 WM
......... 0.025% @ 1 kHz, 0.020% @ 20 kHz at nominal level
CVEQ 100 Series
.................. 0.015% @ 1 kHz at nominal level
S/N
CVEQ1 AAP, CVEQ1 WM
......... >86 dB at output 6 dB, balanced
CVEQ 100 Series
.................. >100 dB at maximum output (unweighted)
Stereo channel separation
CVEQ1 AAP, CVEQ1 WM
......... >75 dB @ 20 Hz to 20 kHz
CVEQ 100 Series
.................. >80 dB @ 1 kHz
Output cable driving distance
(CVEQ 100 Series) ............... Up to 1000’ (300 m) with Extron RG-6 SHR cable
AuDio inPut
Number/signal type ............. 1 stereo unbalanced
Connectors ....................... 2 RCA female
Impedance
CVEQ1 AAP, CVEQ1 WM
......... >10k ohms unbalanced, DC coupled
CVEQ 100 Series
.................. 20k ohms unbalanced, DC coupled
Nominal level .................... -10 dBV (316 mVrms)
Maximum level
CVEQ1 AAP, CVEQ1 WM
......... +6 dBV, balanced at 1% THD+N
CVEQ 100 Series
.................. +8 dBV (2.5 V), unbalanced at 1% THD+N
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
501