Extron electronic FOX 500 Rx Switch User Manual


 
3
Extron FOX 500 Tx, FOX 500 Rx Fiber Optic Transmitter-Receiver Pair • Specications
Maximum level (600 ohm) ����������� >+15 dBm, unbalanced at 1% THD+N
Audio delay ����������������������������������� 1�5 frames
Control/remote
Serial control ports on each unit (transmitter and receiver)
Control �������������������������������� 1 RS-232, 3�5 mm captive screw connector, 5 pole (3 pins are used) (rear
panel)
1 RS-232, 2�5 mm mini stereo jack (front panel)
Pass-through ���������������������� 1 RS-232, 3�5 mm captive screw connector, 5 pole (3 pins are used) (rear
panel); in parallel with 1 RS-232, 2�5 mm mini stereo jack (front panel)
Baud rate and protocol
Control �������������������������������� 9600 baud, 8 data bits, 1 stop bit, no parity
Pass-through ���������������������� 9600 to 115,200 baud
Serial control pin configurations
Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND
Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND
Program control ����������������������������� Extron’s control/configuration program for Windows
®
Extron’s Simple Instruction Set (SIS
)
General
Power ���������������������������������������������� 100 VAC to 240 VAC, 50-60 Hz, 11 watts, internal
Temperature/humidity ���������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling ������������������������������������������� Convection, vents on top and sides
Mounting
Rack mount ������������������������ Yes, with optional rack shelf kit
Furniture mount ���������������� Yes, with optional under desk mounting kit
Enclosure type ������������������������������� Metal
Enclosure dimensions ������������������� 1�7" H x 8�7" W x 9�5" D (1U high, half rack wide)
(4�3 cm H x 22�1 cm W x 24�1 cm D)
(Depth excludes connectors and knobs�)
Product weight ������������������������������ 2�3 lbs (1�0 kg) per unit, 4�6 lbs (2�1 kg) per pair
Shipping weight ���������������������������� 4 lbs (2 kg) per unit, 8 lbs (4 kg) per pair
Vibration ����������������������������������������� ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety ����������������������������������� CE, CUL, FDA Class 1, UL
EMI/EMC �������������������������� CE, C-tick, FCC Class A, ICES, VCCI,
MTBF ����������������������������������������������� 30,000 hours
Warranty ����������������������������������������� 3 years parts and labor
N
All nominal levels are at ±10%.
N
Specifications are subject to change without notice.
7.6-031709-D14