Filter
Top Products
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Picture Adjustments (Analog Only)
Pixel phase
Set a pixel phase value
E1*X2#PHAS} PhasX2#] Adjust the pixel phase to X2#.
Increment value
E1+PHAS} PhasX2#]
Increase the pixel phase.
Decrement value
E1-PHAS} PhasX2#]
Decrease the pixel phase
View pixel phase value
E1PHAS} X2#]
Show the pixel phase value
Total pixels
Set the total pixel value
E1*X2$TPIX} TpixX2$] Set the total pixels to X2$.
Increment value
E1+TPIX} TpixX2$]
Increase the total pixels.
Decrement value
E1-TPIX} TpixX2$]
Decrease the total pixels.
View total pixel value
E1TPIX} X2$]
Show the total pixels.
Horizontal start
Set horizontal start value
E1*X2%HSRT} HsrtX2%]
Set horizontal location of first
active pixel in active window.
Increment value
E1+HSRT} HsrtX2%]
Move the image to the right.
Decrement value
E1-HSRT} HsrtX2%]
Move the image to the left.
View horizontal start value
E1HSRT} X2%]
Show horizontal location of the
first active pixel in active window.
NOTE: X2# = Pixel phase 0 to 63 (32 = default)
X2$ = Total pixels ±255 of the default value (depends on the input rate)
X2% = Horizontal start 0 to 255 (128 = default)
FOX T USW 203 Universal Switcher • SIS Configuration and Control 16