Extron electronic Matrix 12800 Series Switch User Manual


 
M
AT
R
I
X
1
2
8
00
Redundant
• RS-232 Ports
• AC Power Inputs
• MCP/MKP Ports
Hot Swappable,
Dual Redundant
• Fans
• Controllers
• Power Supplies
Modular Upgradeability
through Front of Unit
(up to 128 x 128)
Tool-Free Extraction
of Hot Swappable
Input/Output Cards
Redundant 32 Bit Controller Cards with
Advanced Monitoring of:
• Power Supply Failure
• I/O Card Failure
• Fan Failure
• RGBS and/or RGBHV Sources with DSVP™
And Self-Diagnostics of:
• Cooling System
• Remote Panels
• RS-232 Processing
• System Status
Browser-Based Control
(Ethernet-Based Control)
• Use any Browser like MS Explorer or
Netscape Navigator
• Convenient Remote Control over Networks
and the Internet
• Online Diagnostics and Monitoring
• Receive Failure and Service Messages
through e-mail, PDA, Pager, or Cell Phone
Easy Maintenance
and Serviceability
www.extron.com
© 2008 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.
USA West
+1.714.491.1500 / +800.633.9876
+1.714.491.1517 FAX
USA East
+1.919.863.1794 / +800.633.9876
+1.919.863.1797 FAX
China
+86.21.3760.1568 / +400.883.1568
+86.21.3760.1566 FAX
Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Europe
+31.33.453.4040 / +800.3987.6673
+31.33.453.4050 FAX
Dubai
+971.4.2991800
+971.4.2991880 FAX
Asia
+65.6383.4400 / +800.7339.8766
+65.6383.4664 FAX
www.extron.com
© 2008 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.
USA West
+1.714.491.1500 / +800.633.9876
+1.714.491.1517 FAX
USA East
+1.919.863.1794 / +800.633.9876
+1.919.863.1797 FAX
China
+86.21.3760.1568 / +400.883.1568
+86.21.3760.1566 FAX
Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Europe
+31.33.453.4040 / +800.3987.6673
+31.33.453.4050 FAX
Dubai
+971.4.2991800
+971.4.2991880 FAX
Asia
+65.6383.4400 / +800.7339.8766
+65.6383.4664 FAX
Continued
Matrix 12800 Series
FPC 5000
The FPC 5000 Front Panel Controller is an intuitive, 12.1 inch touch-screen, control interface
designed exclusively for the Matrix 12800. The easy-to-use FPC 5000 can control, monitor,
access, and manage all of the Matrix 12800 matrix switcher set-up and control functions via
an intuitive, menu-driven interface. Any user, regardless of their technical proficiency, can
easily navigate through its simple and straightforward menus to change, monitor, or control the
features of the Matrix 12800. With IP Link Ethernet capabilities, it can access the matrix from
anywhere on a network, from multiple sites, as well as via the Internet. Housed within a 7U
panel, the FPC 5000 can be installed in a rack, podium, or control console.
deScriPtion (c ontinued)
FPC 5000
On the Matrix 12800 Series, IP Link provides technical support personnel with the ability to
receive service and failure messages through an e-mail-enabled cell phone, PDA, pager, or
e-mail account. Utilizing IP Link, the help desk can also view embedded Web pages to manage,
monitor, and troubleshoot the switcher for the following:
Asset Management
Remotely select input and output ties for audio only, video only, or audio and video
Name and select global I/O presets
Set audio input and output volume levels
Set RGB delay time for glitch-free transitions
Upload firmware updates via the Internet
Operating Status and Diagnostics
Monitor primary and redundant power supply voltages
Monitor operating temperature
Recall firmware revision and other data for improved Help Desk support
Provides immediate notification via e-mail for loss of input signal, power supply failure,
and other critical service information
Upload firmware updates
DSVP
Verify active sources by polling inputs for horizontal and vertical sync rate information
SIS
- Simple Instruction Set Control
SIS simplifies RS-232 by utilizing a limited set of commands that are easy to remember and
use. Three factors that make SIS superior for RS-232 remote control are that characters can be
generated directly from the keyboard, the same instruction works with many Extron products,
and it provides informative responses to each command sent.
IP Link
®
Ethernet Control
The Matrix 12800 Series is equipped with Extron's IP Link, an IP integration technology
specifically engineered to meet the needs of professional A/V environments — from K-12
classrooms to large universities, businesses, and residential media systems.
IP Link is built around an integrated, high performance Web server that features global
compatibility with industry standard Ethernet communication protocols, multi-user support,
and GlobalViewer
software. GlobalViewer, a Web-based application, enables a variety of asset
management functions including proactive maintenance and remote technical support from any
administrator authorized LAN, WAN, or Internet client.
Modular & exPandable Matrix SwitcherS
362