Extron electronic MPX 866 A Switch User Manual


  Open as PDF
of 4
 
sPeCIFICatIONs
Specifications are subject to change without notice.
Video
Routing
RGB/VGA ........................................... 8 x 6 matrix
S-video/composite video ................... 6 x 6 matrix
Gain...................................................... Unity
Bandwidth
RGB/VGA ........................................... 300 MHz (-3 dB), fully loaded
S-video/composite video ................... 150 MHz (-3 dB), fully loaded
Differential phase error.......................... 1.0º at 3.58 MHz and 4.43 MHz
Differential gain error ............................ 1.0% at 3.58 MHz and 4.43 MHz
Crosstalk
RGB/VGA ........................................... <-50 dB @ 10 MHz, <-30 dB @ 100 MHz
S-video/composite video ................... -50 dB @ 5 MHz
Switching speed ................................... 100 ms (max.)
Video input
Number/signal type
RGB/VGA ........................................... 8 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs
S-video/composite video ................... Up to 4 S-video and 2 composite video or 6
composite video
Nominal level ........................................ 1 Vp-p for Y of S-video and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for C of S-video
Minimum/maximum levels
RGB/VGA ........................................... Analog: 0.3 V to 1.5 Vp-p with no offset
S-video/composite video ................... Analog: 0.5 V to 2.0 Vp-p with no offset
Impedance............................................ 75 ohms
Horizontal frequency (RGB) ................... 15 kHz to 145 kHz
Vertical frequency (RGB) ....................... 30 Hz to 170 Hz
Return loss
RGB/VGA ........................................... <-40 dB @ 5 MHz
S-video/composite video ................... <-30 dB @ 5 MHz
DC offset (max. allowable,
S-video or composite video) .............. 1.5 V
External sync (genlock,
S-video or composite video) .............. 0.3 V to 0.4 Vp-p
Video output
Number/signal type
RGB/VGA ........................................... 6 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs,
(follows input type)
S-video/composite video ................... 2 S-video, 2 S-video or composite video, and
2 composite video
Nominal level ........................................ 1 Vp-p for Y of S-video and for composite
0.7 Vp-p for RGB
0.3 Vp-p for C of S-video
Minimum/maximum levels
RGB/VGA ........................................... Analog: 0.3 V to 1.5 Vp-p with no offset
S-video/composite video ................... Analog: 0.0 V to 2.0 Vp-p with no offset
Impedance............................................ 75 ohms
Return loss
RGB/VGA ........................................... -40 dB @ 5 MHz
S-video/composite video ................... -30 dB @ 5 MHz
DC offset .............................................. ±5 mV with input at 0 offset
Switching type
RGB/VGA ........................................... Triple-Action
S-video/composite video ................... Vertical interval
Sync
Input type (VGA group) ........................ RGBHV, RGBS, RGsB, RsGsBs
Output type (VGA group) ..................... RGBHV, RGBS, RGsB, RsGsBs (follows input)
Genlock connector ................................ 1 BNC female (video input 1)
Standards ............................................. NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level ............................................. 1.9 V to 5.0 Vp-p
Output level .......................................... TTL: 5.0 Vp-p, unterminated for RGBHV, RGBS
Input impedance .................................. 510 ohms
Output impedance ............................... 75 ohms
Max input voltage ................................ 5.0 Vp-p
Max. propagation delay ........................ 30 ns
Max. rise/fall time ................................. 4 ns
Polarity ................................................. Positive or negative (follows input)
Audio
Routing ................................................. 14 x 6 stereo matrix
Gain...................................................... Unbalanced output: -6 dB; balanced
output: 0 dB
Frequency response .............................. 20 Hz to 20 kHz, ±0.05 dB
THD + Noise ......................................... 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal
S/N ....................................................... >90 dB, balanced, at maximum output (21 dBu)
(unweighted)
Crosstalk ............................................... <-120 dB @ 1 kHz, fully loaded
Stereo channel separation ..................... >80 dB @ 1 kHz
CMRR ................................................... >75 dB @ 20 Hz to 20 kHz
Volume range ....................................... -98 dB to 0 dB
(volume numbers 0 to 64 in 1.0 dB steps)
Audio input
Number/signal type .............................. 14 stereo, balanced/unbalanced
Impedance............................................ >25k ohms unbal., 50k ohms bal., DC coupled
Nominal level ........................................ -10 dBV (316 mVrms)
Maximum level ..................................... +20 dBu, (bal. or unbal.) at 1% THD+N
Input gain adjustment .......................... –18 dB to +24 dB, adjustable per input by
RS-232, Ethernet, or front panel
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type .............................. 6 stereo, balanced/unbalanced
Connectors ........................................... (6) 3.5 mm captive screw connectors, 5 pole
Impedance............................................ 50 ohms unbalanced, 100 ohms balanced
Gain error ............................................. ±0.1 dB channel to channel
Maximum level (Hi-Z) ........................... >+20 dBu, bal. or unbal. at 1% THD+N
control/remote — Switcher
Serial host control port.......................... (2) RS-232: 2 rear panel 3.5 mm captive screw
connectors, 3 pole;
1 front panel 2.5 mm stereo mini jack
(in parallel with the rear panel secondary port)
Baud rate and protocol ......................... 9600 baud; 8 data bits, 1 stop bit, no parity
Serial control pin configurations ............ Captive screw: 1 = TX, 2 = RX, 3 = GND
Mini jack: tip = TX, ring = RX, sleeve = GND
Ethernet host control port ..................... 1 RJ-45 female connector
Ethernet data rate ................................. 10/100Base-T, half/full duplex autodetect
Ethernet protocol .................................. ARP, DHCP, ICMP (ping), TCP/IP, Telnet, HTTP,
SMTP
Default settings ..................................... Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off
Web server ............................................ Up to 200 simultaneous sessions
1 MB nonvolatile user memory
Power ................................................... 100 VAC to 240 VAC, 50/60 Hz, 15 watts
Temperature/humidity .......................... Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Rack mount .......................................... Yes
Enclosure type ...................................... Metal
Enclosure dimensions ............................ 3.5" H x 17.0" W x 9.4" D (2U high)
8.9 cm H x 43.2 cm W x 23.9 cm D
Product weight ..................................... 15 lbs (6.8 kg)
Shipping weight ................................... 25 lbs (12 kg)
Vibration ............................................... ISTA 1A in carton
Listings ................................................. UL, CUL
Compliances ......................................... CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF .................................................... 30,000 hours
Warranty ............................................... 3 years parts and labor
NOTE: All nominal levels are at ±10%.
Model Version Description Part Number
MPX 866 A Media Presentation Matrix .................................... 60-825-01
 previous