Extron electronic P/S 100 Power Supply User Manual


  Open as PDF
of 2
 
P/S 100 • IndicationsP/S 100 • Installation
Installation
32
Description
The Extron P/S 100 is a 12VDC 2.0 A universal power supply
with ten separate outputs on two 10-connector, 3.5mm captive
screw connectors. The outputs are rated at 12V, 200 mA each.
The universal power supply can power up to ten devices that
require 12VDC external power, such as some Extron interfaces
and products in the VersaTools™ line of basic distribution
amplifiers, switchers, and associated video accessories.
The rack mountable P/S 100 has an internal auto-switchable
power supply that can accept 100VAC to 240VAC at 50 Hz to 60 Hz.
Installation
For optional rack mounting, mount up to four P/S 100s on a 19"
1U Universal Rack Shelf (Extron part #60-190-01) (figure 1).
(2) 4-40 x 3/16" screws
Use 2 mounting holes
on opposite corners
Half rack width
false front panel
uses 2 front holes
Quarter Rack Width
False Front Panel
P
/
S
1
0
0
1
2
V
D
C
P
O
W
E
R
S
U
P
P
L
Y
Figure 1 — Rack mounting the P/S 100
1. Mount the P/S 100 on the rack shelf, using two 4-40 x 3/16”
screws in opposite (diagonal) corners.
2. If necessary, mount the half rack width false front panel
(included with the Universal Rack Shelf) and/or the quarter
rack width false front panel (included with the P/S 100) to
the shelf, using two 4-40 x 3/16” screws in the front holes
for each panel.
Rear Panel Connections
1
Connect the power cables from the various devices that
will receive power from the P/S 100 to the 3.5mm captive
screw connectors (included) (figure 2).
50/60 Hz 0.9 A MAX
1
100-240V -
CHANNEL OVERLOAD
POWER-GREEN
OVERLOAD-AMBER
12 VDC OUTPUT 200 mA PER CHANNEL
2 3 4 5 6 7 8 9 10
2
1
4
P/S 100
12 VDC POWER SUPPLY
3
5
Figure 2 — P/S 100 front and rear panels
Each captive screw connector has ten poles and can
support up to five power supply outputs (figure 3).
1
2
345
- wire
+ wire
- wire
Up to 5 power
supply outputs
Power connector
plastic cover
+ wire
Figure 3 — Connecting power cables to P/S 100
2
Plug in the P/S 100.
Indications
3
Power LED — This front panel LED (figure 3) lights to
indicate that the P/S 100 is receiving power.
4
Power/Overload LED — This rear panel LED lights green
when power is applied and is normal, and lights amber
 previous