Extron electronic RGB 202 Rxi Switch User Manual


 
1-3RGB 202 Rxi , RGB 202 Rxi VTG • Specifications
Crosstalk ....................................... <-90dB @ 1 kHz, fully loaded
Stereo channel separation .......... >90dB @ 1 kHz to 20 kHz
Audio input
Number/signal type ................... 2 PC level stereo, unbalanced
Connectors.................................... (2) 3.5 mm stereo jacks (female) (2 channel); tip (L), ring (R), sleeve (ground)
Impedance .................................... >10 kohms, unbalanced, DC coupled
Nominal level ............................... -10dBV (316mV)
Maximum level ............................ +8.5dBu, (balanced or unbalanced) at 1%THD+N
Audio output
Number/signal type ................... 1 buffered stereo (2 channel), balanced/unbalanced
Connectors.................................... (1) 3.5 mm, captive screw connector, 5-pole
Impedance .................................... 50 ohms unbalanced, 100 ohms balanced
Gain error...................................... ±0.1dB channel to channel
Maximum level (Hi-Z) ................ >+14dBu, balanced at stated %THD+N
Maximum level (600 ohm) ......... >+8.5dBm, balanced at stated %THD+N
0dBu = 0.775 volts (RMS).
Control/remote — interface
Serial control port ........................ RS-232, 9-pin female D connector (also used for contact closure)
Baud rate and protocol ............... 9600, 8-bit, 1 stop bit, no parity
Serial control pin configuration .. 2 = TX, 3 = RX, 5 = GND
Contact closure ............................ 1 9-pin female D connector (also used for RS-232)
Contact closure pin configuration. 1 = input #1, 4 = input #2, 5 = GND
Program control ........................... Extron’s control program for Windows
Extron’s Simple Instruction Set
– SIS
General
Input power .................................. 100VAC to 240VAC, 50/60 Hz, 18 watts, internal, autoswitchable
MBC power jacks ......................... 9.0VDC, 0.15A
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +113°F (0° to +45°C) / 10% to 90%, non-condensing
Rack mount................................... Yes, with an optional rack shelf (part #60-190-01)
Furniture mount .......................... Yes, with an optional under-desk mounting kit (part #70-077-01) or
through-desk mounting kit (part #70-077-02)
Enclosure type.............................. Metal, vented
Enclosure dimensions ................. 1.75" H x 8.75" W x 8.6" D (1U high, half rack width)
4.4 cm H x 22.2 cm W x 21.8 cm D
(Depth excludes knobs.)
Product weight............................. RGB 202 Rxi .............. 2.2 lbs (1.0 kg)
RGB 202 Rxi VTG .... 2.3 lbs (1.0 kg)
Shipping weight........................... 5 lbs (2.3 kg)
Vibration ....................................... ISTA/NSTA 1A in carton (International Safe Transit Association)
Listings .......................................... UL, CUL
Compliances ................................. CE, FCC Class A
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
Specifications are subject to change without notice.
(7.40-121602-D4)