Extron electronic RGB 203 Rxi Network Card User Manual


 
Specifications — RGB 203 Rxi, cont’d
Extron RGB 203 Rxi Interface • Specications
2
Nominal level �������������������������������� -10 dBV (316 mVrms)
Maximum level ������������������������������ +8�5 dBu, (balanced or unbalanced) at 1% THD+N
N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu
Audio output
Number/signal type ��������������������� 1 buffered stereo (2 channel) or mono, balanced/unbalanced
Connectors ������������������������������������� (1) 3�5 mm, captive screw connector, 5 pole
Impedance �������������������������������������� 50 ohms unbalanced, 100 ohms balanced
Gain error ��������������������������������������� ±0�1 dB channel to channel
Maximum level (Hi-Z) ����������������� >+14 dBu, balanced at 1% THD+N
Maximum level (600 ohm) ����������� >+8�5dBm, balanced at stated %THD+N
Control/remote — interface
Serial control port �������������������������� RS-232, 9-pin female D connector (also used for contact closure)
Baud rate and protocol ����������������� 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations 2 = TX, 3 = RX, 5 = GND
Contact closure ������������������������������ (1) 9-pin female D connector (also used for RS-232)
Contact closure pin configuration 1 = input #1, 4 = input #2, 5 = GND
Program control ����������������������������� Extron’s control/configuration program for Windows
®
Extron’s Simple Instruction Set (SIS
)
General
Input power ����������������������������������� 100 VAC to 240 VAC, 50/60 Hz, 18 watts, internal
MBC power jacks �������������������������� 9�0 VDC, 0�15 A
Cooling ������������������������������������������� Convection, vents on left and right sides
Temperature/humidity ���������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +113 °F (0 to +45 °C) / 10% to 90%, noncondensing
Mounting
Rack mount ������������������������ Yes, with optional 1U, 9�5” deep rack shelf, part #60-190-01 (RSU 129) or
60-604-01 (RSB 129)
Furniture mount ���������������� Yes, with optional under-desk mounting kit, part #70-077-01 (MBU 125) or
through-desk mounting kit, part #70-077-02 (MBD 129)
Enclosure type ������������������������������� Metal
Enclosure dimensions ������������������� 1�75" H x 8�75" W x 8�0" D (1U high, half rack wide)
(4�4 cm H x 22�2 cm W x 20�3 cm D; with rear BNCs, D = 8�4" [21�3 cm])
(Depth excludes knobs�)
Product weight ������������������������������ 2�2 lbs (1�0 kg)
Shipping weight ���������������������������� 5 lbs (3 kg)
Vibration ����������������������������������������� ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety ����������������������������������� CE, CUL, UL
EMI/EMC �������������������������� CE, C-tick, FCC Class A, ICES, VCCI
MTBF ����������������������������������������������� 30,000 hours
Warranty ����������������������������������������� 3 years parts and labor
N
All nominal levels are at ±10%.
N
Specifications are subject to change without notice.
7.6-111008-D6