Filter
Top Products
7KDAB, Version 2.0, 19-Aug-2007
Vyex LLC, 2003-2007
26
STOP – Stop current WAV file playback
Immediately terminates the playback of any WAV file. This may be useful if the command line user wishes to interrupt the
playback of a long WAV file in order to gain access to file management commands.
TIME – Display or Set the current Time and Date
This command will display or set a time of day clock in the 7KDAB. The time and date maintained within the 7KDAB will
be used for the time and date stamp on any files written to the FLASH card.
Note that when setting the time and date, only basic range checking is performed and that in some instances, the day of
month will be set to the maximum number of days for that particular month.
Note that the time of day maintained within the 7KDAB does not survive a power cycle, and that the clocks
accuracy is not specified and may accumulate error of several minutes per day.
Set time example:
7kDAB-\>time 13:33:00
7kDAB-\>
Set time and date example:
7kDAB-\>time 13:33:14 8/23/2007
7kDAB-\>
Display time and date example:
7kDAB-\>time
13:33:15 08/23/2007
TYPE – Type a file to the console
Causes the contents of a file to be echoed to the console serial port.
Control-C can be used to abort the file echo. Control-S will pause the file echo, and Control-Q will resume.