Filter
Top Products
AutoLam laminating
Automatically senses the thickness of inserted
pouch and document and self-adjusts to optimal
laminating settings. The laminator defaults to
‘AutoLam’ setting if no other function is selected
within 5 seconds of switching it on.
Easy-Access open mechanism
The Easy-Access mechanism allows user to safely
and easily open the laminator for cleaning and
maintenance.
Auto Reverse function / overload protec-
tion
Reverses laminating process until the pouch
has been ejected from the machine in case of
misfeeds and overloads.
CleanMe glue sensor
Checks if glue or dirt is on the mechanism and
guides the user to clean the laminator.
HeatGuard™ technology
Keeps the laminator surface up to 50% cooler and
makes it more energy efficient then comparable
laminators.
A Easy-Access opening cover G Selection buttons (up/down/left/right)
B Adjustable document entry guide H Select / OK button
C Entry support shelf I Detachable document exit tray
D Reverse button J On/off switch (at rear)
E Standby button K Carry points (at sides)
F LCD user interface
LAMINATOR CONTROLS
FEATURES & TIPS
5
CLEAN ME
SAFE TO TOUCH
FEATURES
• Always put item into the appropriate sized pouch.
• Do not laminate heat-sensitive documents (i.e. tickets,
ultrasounds etc...).
• Always test laminate with a similar size and thickness
before final process.
• If required, trim excess material from around the item
after lamination and cooling.
• For best results, use Fellowes
®
brand laminating pouches:
Enhance 3 Mil, Capture 5 Mil, Protect 7 Mil, Preserve 10
Mil.
• When operating in manual mode it is recommended to start
first with the thinnest pouches and lowest temperature.
The Auto shut-down switches the machine off if
it hasn’t been used for 60mins to save energy.
To return to the “Home” Menu at any stage,
press the “Left/back” key on the navigation
buttons.
The Entry Guide can be manually adjusted
(especially for smaller documents) to ensure
the items are best supported when inserted and
helps avoid mis-feeds.
If the service symbol shows in the LCD screen,
please call your service engineer or Fellowes
customer service.
TIPS