Fellowes 125Ci / 125i Paper Shredder User Manual


 
*100% Jam Proof when used in accordance with user manual
Do nothing and
shredder will go
automatically to sleep
mode after 2 minutes
of inactivity
BASIC SHREDDING OPERATION
Press ( ) ON to activate
PAPER/CARD OR CD
1
Feed paper/card straight
into paper entry and
release
3
Plug in and put disconnect
power switch in ON
(I) position
To shred CDs or credit
card, rotate safety flap
into place
When finished
shredding set to
OFF (
)
or
or
7
www.fellowes.com features an extensive on-line support section with a number of self-service options
4
AUTO
6
AUTO
2
Hold CD/card at edge,
and feed into center of
entry and release
5
7
Continuous operation:
45 minutes maximum
NOTE: Continuous operation
beyond 45 minutes will trigger
45 minute cool down period.
Eliminatespaperjamsandpowersthroughtoughjobs.
JAM PROOF SYSTEM OPERATION*
Advanced Jam Prevention- Electronically
measurespaperthicknesstopreventpaperjams:
Remove several sheets until
indicator is below red.
Continue 100% Jam
Proof Shredding
If a misfeed
occurs:
If
illuminates after paper has been
reversed, press reverse and remove paper.
Otherwise, regular shredding will resume.
1 2 3
UptoRED:Toomany
sheets have been inserted.
UptoGREEN:Moresheets
can be added.
UptoYELLOW:Productivity
is optimized.
All indicators light up and
shredder pauses for 3-6 seconds
Wait for flashing to stop after automatic correction
is complete. Regular shredding will resume.
ADVANCED PRODUCT FEATURES
Jam Proof System
Eliminatespaperjamsandpowers
throughtoughjobs
Patented SafeSense
®
Technology
Stops shredding immediately when hands
touch the paper entry
Sleep Mode
Energy saving feature shuts down automatically
after 2 minutes of no shredding activity
SAFESENSE
®
TECHNOLOGY OPERATION
SLEEP MODE OPERATION
Stops shredding immediately when hands touch the paper opening.
Energy saving feature shuts down the shredder after
2 minutes of inactivity
WHEN IN SLEEP MODE
In sleep mode
To get out of sleep mode
touch control panel
insert paper
or
AUTO
1
2 3
SET-UP AND TESTING
Turn the shredder ON
( ) to activate SafeSense
®
Touch test area and
look for the SafeSense
®
indicator to illuminate
SafeSense
®
is active and
working properly
If hand is held on SafeSense
®
area more than 2 seconds
shredder will shut off
AUTO
1
2 43