Fellowes 30TM Binding Machine User Manual


 
4
CAPABILITIES
When binding;
- plug the machine into an easily accessible socket.
- to prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall
socket.
Performance
Entry width 12”
Binding capacity (max) 1.2” / 300 sheets (20lb)
Estimated heat-up time 4 minutes
Cool down time 30-60 minutes
Binding cycles 1-10 cycles / 1-2 minutes
Ready indication Light & beeps
LED interface Yes
Heat-Shield Yes
Power Save / Auto shut-off Yes (30 mins)
Multiple Document Binding Yes
Technical Data
Voltage / Frequency /
Current(Amps) 110-120V AC, 60Hz, 5.5A
Wattage 600W
Dimensions (HxWxD) 20.9” x 9.4” x 3.9”
Net weight 5.7lb
Binding capacity
The maximum sheet capacity can be a single (up to 300
sheet max) or multiple documents up to approximately
300 sheets max.
Eg: 1 x 300 sheets = 300 max
5 x 60 sheets = 300 max
10 x 15 sheets = 150 max
DO ensure the machine is on a stable surface.
DO test scrap sheets and set the machine before use.
DO remove staples and other metal articles prior to binding.
DO keep the machine away from heat and water sources.
DO turn off the machine after each use.
DO unplug the machine when not in use for an extended
period.
DO use binding covers designed for use at the appropriate
settings.
DO keep away from pets, while in use.
DO NOT leave the power cord in contact with hot surfaces.
DO NOT leave power cord hanging from cupboards or
shelves.
DO NOT use appliance if the power cord is damaged.
DO NOT attempt to open or otherwise repair the machine.
DO NOT exceed the machines quoted performance.
DO NOT allow children to use this machine without adult
supervision.
DO NOT bind sharp or metal objects (eg: staples, paper
clips).
DO NOT bind heat-sensitive documents (eg: tickets, ultra-
sounds etc).
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
Please read before use and keep for future reference.
CAUTION:
Unplug the machine at the wall. Allow the machine to cool.
The outside of the machine can be cleaned with a damp cloth. Do not use solvents or flammable materials to polish the machine.
STORAGE & CLEANING
DO NOT touch the heating plate while binding - it
is very hot.
E