Fellowes CL 95/CL 125 Laminator User Manual


  Open as PDF
of 4
 
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
CAPABILITIES
CL 95 CL 125
Pouch Thickness 3 mil 3
mil
Estimated Heat-Up Time 6 Minutes 6
Minutes
Approximate Cool-Down Time 90 Minutes 90
Minutes
Lamination Speed 12” (30 cm)/Minute 12” (30
cm)/Minute
CL 95 CL 125
Maximum Width 9” (
220 mm)
12.5” (330 mm)
Voltage
120V~
120V~
Frequency 60 Hz
60 Hz
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
• The socket-outlet shall be installed near the equipment and
shall be easily accessible.
• To prevent electrical shock, do NOT use laminator close to water
and do NOT spill water on laminator, electric cord, or wall
socket.
• Do not leave electric cord in contact with a warm surface.
• Do not leave electric cord hanging from a cupboard or shelf.
• Do not use laminator if electric cord is damaged.
• Do not laminate metal objects.
• Only use pouches specifi cally designed for the lamination setting (Hot or Cold) you intend
to use.
• Always supervise children during laminator operation.
• Keep pets away from laminator while in use.
• Switch off and unplug laminator when not in use.
• Do not open or attempt to repair the laminator yourself, as this could result in electric shock
and will void your warranty. Contact Customer Service if you have questions. Please note the
warranty does not apply in cases of abuse, mishandling or unauthorized repair.
• Always wrap cord around feet while carrying or in storage.
• Always put item in a pouch. Never
laminate an empty pouch.
• Trim excess pouch material from around
your item after laminating and cooling.
• If using both hot and cold lamination in
one session, use the cold setting fi rst to
avoid having to wait for the laminator to
cool down.
• With self-adhesive pouches, use the lami-
nator on the cold setting for a smoother
fi nish.
TIPS
• Before laminating valuable items, do
a test run with an item similar in size
and thickness.
• When not in use, wrap cord around
feet for portable ease and optimal stor-
age.
• When laminating heat-sensitive
documents (i.e., tickets, ultrasounds,
etc.) only use self-adhesive pouches on
a cold setting.
• Use a dry-erase marker for writing on
laminated pouches.
Pouch/Document Entry
Stand-by Light
(red)
Carry Handle
- for easy
portability and tray support
Ready Light
(green)
Dual-Purpose Tray
- serves as
Dual-Purpose Tray - serves as Dual-Purpose Tray
guide and protective dust cover
Hot/Cold
Lamination Selector
Cord Wrap/Feet
- for optimal
cord management and storage
REFILL SUPPLIES – 3 MIL POUCHES
For Hot Lamination For Cold Lamination
Letter* Luggage Tag with Loop Self-Adhesive Letter
Photo Business Card
ID Card (Unpunched) File Card
For best results, use Fellowes
®
brand pouches from your local retailer.
*Includes combination cleaning / carrier sheet.
Stand-by
Light
(Do Not
Laminate)
Indicator Light Key
Cold
Lamination
Off
Hot
Lamination
Ready Light
Anti-Jamming
Release Lever
 previous next