Filter
Top Products
TROUBLESHOOTING LIMITED WARRANTY
Fellowes warrants all the cutting cylinders of the machine to
be free of defects in material and workmanship for 5 years
from the date of
purchase by the original consumer. Fellowes warrants all other
parts of the machine to be free of defects in material and
workmanship for 1 year from the date of purchase by the orig-
inal consumer. If any part is found to be defective during the
warrant period, your sole and exclusive
remedy will be repair or replacement, at Fellowes’ option and
expense, of the defective part.
This warranty does not apply in cases of abuse, mishandling or
unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING
THAT OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO
THE APPROPRIATE
WARRANTY PERIOD SET FORTH ABOVE.
In no event shall Fellowes be liable for any
consequential or incidental damages attributable to this prod-
uct. This warranty gives you specific legal rights. You may
have other legal rights that vary from state to state.
For more detail or to obtain service under this warranty, please
contact Fellowes Customer Service at 1-800-955-0959,
Monday through Friday, 8 AM - 5 PM (Central Standard Time).
For specific instructions on obtaining service under this warran-
ty on machines purchased outside the USA, contact the appro-
priate location listed in the Contact for Service section of this
instruction manual.
Warrantor: Fellowes Manufacturing Company.
a. Shredder is not plugged in.
b. Power switch is in the OFF (O) position.
Move switch to AUTO (I) position.
c. Shredder is jammed. See "Clearing a
Jam" section.
d. Shredder has exceeded the maximum run
time and requires a "cool-down" time. See
"Product Usage Guide" on front panel.
e. Shredder is not assembled properly. See
"Assembly."
a. Cutting blades need to be oiled REGULAR-
LY. See "MAINTENANCE" section.
a. Shredder has exceeded the maximum run
time and requires a "cool-down" time. See
"Product Usage Guide" on front panel.
b. Shredder is jammed. See "OPERATION -
Clearing a Jam."
a. Cutting blades need to be oiled REGULAR-
LY. See "MAINTENANCE" section.
a. Shredder is not assembled properly. See
"ASSEMBLY."
b. Paper is jammed. See "OPERATION -
Clearing a Jam."
a. This is normal. The shredder runs a few sec-
onds longer than the paper in order to keep
the cutters clear of paper particles and
reduce the chances of a jam.
Shredder will not operate.
Shredder makes a loud
squeaking or rubbing
noise.
Shredder suddenly stops
while
shredding.
Shredder shreds less than
capacity.
Red LED is lit.
Shredder runs for a few
seconds after the paper
has cleared the cutters.
Australia Benelux Canada France Germany Italy Japan Poland United Kingdom
Tullamarine, Vic Vianen, NL Markham, Ont. Rennes, I-V Garbsen, Han. Camerano, AN Tokyo Warsaw Doncaster, S. Yorks.
®
© 2001 Fellowes Printed in China. Form No. 30031B
1789 Norwood Avenue • Itasca, Illinois 60143-1095
630-893-1600
Customer Service 1-800-955-0959
www.fellowes.com