Fellowes DS-16Ci Paper Shredder User Manual


  Open as PDF
of 5
 
ENGLISH
Model DS-16Ci
4
A
U
T
O
A
U
T
O
1
5
A
UT
O
AU
T
O
1
5
3
DISABLING THE FEATURE
DISABLING THE FEATURE
Should the SafeSense
®
indicator stay lit without
touching the opening
The shredder will stop and
SafeSense
®
will need to
be deactivated
To deactivate, shift override
switch to the “not active“
position
Once deactivated, the
indicator will flash and
the SafeSense
®
feature
will not function
To clear paper, press
and hold forward ( )
key until paper is
shredded
Once the paper is cleared,
reactivate the SafeSense
®
feature (To re-engage,
see Operations)
6
1
3
2 4
5
6
SAFESENSE
®
TECHNOLOGY
Stops shredder immediately when hands are too close to the paper entry.
A
U
T
O
1
5
1
AUTOAUTO
AUTO
2
3
5
AUTOAUTO
3
5
5
3
4
SAFESENSE
®
TECHNOLOGY OPERATION
Stops shredder immediately when hands are too close to the paper entry.
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
JAM PROOF SYSTEM *
ADVANCED PRODUCT FEATURE MAINTENANCE AND TROUBLESHOOTING
A
U
T
O
A
U
T
O
1
5
A
U
T
O
A
U
T
O
1
5
SafeSense
®
is active and
working properly
Touch test area and
look for the SafeSense
®
indicator to illuminate
SafeSense
®
is deactivated when
indicator is flashing
Shift override switch to
the “active” position,
reactivating SafeSense
®
Confirm the indicator is no longer
flashing and retest by putting
your hand on the test area
SET-UP AND TESTING
2 3 1 2
FLASHING INDICATOR
1
A
U
T
O
A
U
T
O
1
5
3
Turn the shredder ON
( ) to activate SafeSense
®
Should you choose to disable
the system, press and hold
the auto button (blue) and
reverse ( ) key at the
same time
Once disabled, the blue
Auto light is no longer
illuminated (To re-engage,
repeat step 1)
If steps 4 and 5 do not clear
jam, reverse paper all the
way out, remove several
sheets and refeed
If jam occurs, press and
hold forward ( ) key until
the document is completely
through the shredder
If not cleared, press
reverse ( ) briefly
(repeat steps 4 and 5
until shredded)
*100% Jam Proof when used in accordance with user manual
Shredding can continue with
the system disabled, however a
paper jam may occur with too
many sheets and Remove
Paper icon
( )
will illuminate
5
TO CLEAN THE SENSORS
ACCESSORIES
Maintenance is an important part of protecting your investment. Don’t forget oil and shredder bags.
PREVENTIVE MAINTENANCE AND MISCELLANEOUS TROUBLESHOOTING
• Run shredder once a day in reverse for 15 seconds to clear cutters
• Empty wastebasket when bin full indicator light is illuminated using bag # 36052
• Shredder will not function if the pull-out bin is not pushed all the way in, or if bin needs to be emptied.
• When shredding for a prolonged period of time, the motor can become warm and require a cool down period. When this occurs the overheat indicator will alert you to the
problem, this model will require 30 minutes to cool down.
PROBLEM STILL NOT SOLVED?
Fellowes is committed to giving our customers the support and service they deserve. That is why we offer several options for you to find technical information, step-by-step
assistance and personal attention.
• www.fellowes.com features an extensive on-line support section with a number of self-service options
• Our customer service professionals are dedicated to resolve any of your issues
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
®
Shredder oil – #35250 DS-16Ci Shredder
plastic bag – #36052
CLEANING AUTO-START INFRARED SENSORS
BASIC PRODUCT MAINTENANCE AND TROUBLESHOOTING
Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors may become blocked by paper dust causing the motor to run
even if there is no paper present
(Note: two paper detection sensors are located in the center of the paper entry).
OILING SHREDDER
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
*Apply oil across entry Press forward Shred one sheet
2
Press and hold forward ( )
2-3 seconds
5
3
4
12
A
U
TO
A
U
T
O
1
5
1
• All cross-cut shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive noise when shredding and could
ultimately stop running. To avoid these problems, we recommend you oil your shredder each time you empty your waste bin.
1
Turn off and unplug
shredder
Lift CD flap. Locate Auto-start
infared sensor.
A
U
T
OA
U
T
O
1
5
2
Dip cotton swab in
rubbing alcohol.
Using cotton swab, wipe
away any contamination
from the paper sensors.
A
U
T
OA
U
T
O
1
5
54
A
U
T
O
A
UT
O
3
A
UTO
A
U
T
O
1
5
3
 previous