Filter
Top Products
4
CAPABILITIES
- The machine is for indoor use only. Plug the machine into an easily accessible socket.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.
DO ensure the machine is on a stable surface.
DO test laminate scrap sheets and set the machine before final laminations.
DO remove staples and other metal articles prior to laminating.
DO keep the machine away from heat and water sources.
DO turn off the machine after each use.
DO unplug the machine when not in use for an extended period.
DO use pouches designed for use at the appropriate settings.
DO keep away from pets, while in use.
DO ensure self-adhesive pouches are only used with the cold setting.
DO NOT leave the power cord in contact with hot surfaces.
DO NOT leave power cord hanging from cupboards or shelves.
DO NOT use appliance if the power cord is damaged.
DO NOT attempt to open or otherwise repair the machine.
DO NOT exceed the machines quoted performance.
DO NOT allow children to use this machine without adult supervision.
DO NOT laminate sharp or metal objects (eg: staples, paper clips).
DO NOT laminate heat-sensitive documents (eg: tickets, ultrasounds etc) on hot
settings.
DO NOT laminate with self-adhesive pouches on hot settings.
DO NOT laminate an empty pouch.
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
LAMINATOR CONTROLS
A On / off switch
B Ready LED
C Release lever ( )
D Carry handle
E Pouch / document entry slot
F Pouch / document exit
G Power on LED
‘Release’ function
To remove or re-align a pouch during lamination, activate the release lever
located on the top of the machine. The pouch can only be removed from the
entry slot when the lever is activated.
• For best results, use Fellowes ® brand pouches: 3 Mil.
• This machine does not need a carrier to laminate. It is a carrier-free
mechanism.
• Always put the item to be laminated into the appropriate sized pouch.
• Always test laminate with a similar size and thickness before final process.
• Prepare pouch and item for lamination. Place item within pouch centered
and touching the leading sealed edge. Ensure the pouch is not too large for
the item.
• If required, trim excess material from around the item after lamination and
cooling.
FEATURES & TIPS
Performance
Format 125 = 12.5” / 320mm
95 = 9.5” / 240mm
Entry width A3 = 325mm
A4 = 240mm
Pouch thickness 3 Mil (per side)
Warm up time (estimate) 5 minutes
Cool down time 60-90 minutes
Lamination speed (+/- 5%) approx. 12”/min (fixed speed)
Number of rollers 2
Ready indication Light
Release lever Yes
Clear Path / Anti-jam engine Yes
Technical Data
Voltage / Frequency / Current(Amps) 125 = 110-120V AC, 60Hz, 2.2A
95 = 110-120V AC, 60Hz, 2.0A
Wattage 125 = 480 Watts
95 = 430 Watts
Dimensions (HxWxD) 125 = 4” x 19.4” x 6.3”
95 = 4” x 15.7” x 6.3”
Net weight 125 = 3.3lb
95 = 2.6lb
Max document thickness
(laminating capacity) .040” / 1 mm
ENGLISH
E