Fellowes MS-470C Paper Shredder User Manual


  Open as PDF
of 2
 
Do nothing and
shredder will go
automatically to
sleep mode
2
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
15
15
15
15
• Keepawayfromchildrenandpets.Keephandsawayfrompaper
entry. Always set to off or unplug when not in use.
• Keepforeignobjects–gloves,jewelry,clothing,hair,etc.–away
fromshredderopenings.Ifobjectenterstopopening,switchto
Reverse()tobackoutobject.
• Never use aerosol products, petroleum based lubricants or other flammable
products on or near shredder. Do not use canned air on shredder.
• Donotuseifdamagedordefective.Donotdisassembleshredder.Do
not place near or over heat source or water.
• ThisshredderhasaDisconnectPowerSwitch(H)thatmustbeintheON(I)
position to operate shredder. In case of emergency, move switch to OFF (O)
position. This action will stop shredder immediately.
• Avoidtouchingexposedcuttingbladesundershredderhead.
• UseonlydesignatedentryforshreddingCDs
• KeepfingerawayfromCDholewhenshredding.
• Donotputforeignobjectsinpaperentry.
• Thegroundedsocket-outletshallbeinstalledneartheequipmentandshallbe
easily accessible.
KEY
CAPABILITIES
ADVANCED PRODUCT FEATURES
BASIC SHREDDING OPERATION
Press ( ) ON to
activate
PAPER/CARD OR CD
1
Feed paper/card
straight into paper
entry and release
MS-470C
3
Plug in and put
disconnect power
switch in ON (I) position
Hold CD at edge,
feed into CD
entry and release
When finished
shredding set
to OFF (
)
or
4 6
ENGLISH
ModelMS-470Ci
Will shred: Paper, credit cards, CD/DVDs, staples and standard paper clips
Will not shred: Adhesive labels, continuous form paper, transparencies, newspaper,
cardboard,largepaperclips,laminates,filefolders,X-raysorplasticotherthannotedabove
Paper/Card shred size:
Micro-Cut ......................................................5/64inchesx15/32inches(2mmx12mm)
CD shred size:
Strip-Cut .......................................................................................... 25/64inches(10mm)
Maximum:
Sheets per pass ........................................................................................................... 12*
CDs/Cards per pass ....................................................................................................... 1*
Paper entry width ...........................................................................91/2inches(240mm)
CDentrywidth...........................................................................513/64inches(132mm)
*8.5inchesx11inches,20lb.,(75g)paperat120V,60Hz,6Amps;heavierpaper,humidityor
other thanratedvoltagemayreducecapacity.Recommendeddailyusagerates:4,000sheetsper
 day;200creditcards;10CDs;5paperclips
Fellowes SafeSense
®
shredders are designed to be operated in home and office environments ranging
between50–80degreesFahrenheit(10–26degreesCelsius)and40–80%relativehumidity.
www.fellowes.comfeaturesanextensiveon-linesupportsectionwithanumberofself-serviceoptions
J. Control Panel and LEDs
1.Reverse
2. ON/OFF
3.Forward
4.Binfull
5. Door open
A. SafeSense
®
Technology
B. Paper entry
C. CD entry
D. Door
E.Basket-paper(inside)
F. Basket-CD(inside)
G. See safety instructions
H. Disconnect power switch
I. Casters
6. Remove paper
7. Sheet capacity indicator
8.SafeSense
®
indicator (yellow)
9. Auto button
AUTO
2
AUTO
5
A.
B.
D.
C.
G.
J.
H.
I.
E.
F.
Jam Proof System
Eliminatesfrustratingjams
by preventing overloads
and powering through
misfed paper.
Patented SafeSense
®
Technology
Stops shredder immediately
when hands are too close to
the paper entry.
MicroShred Technology
MicroShred cut provides
maximum security by shredding
paperintoover2,513particles
per81/2"x11"mmsheet.
Sleep Mode
Energy saving feature
shuts down automatically
after 2 minutes of no
shredding activity
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
JAM PROOF SYSTEM OPERATION*
*100% Jam Proof when used in accordance with user manual
3
AdvancedJamPrevention-Electronically
measurespaperthicknesstopreventpaperjams:
Remove several sheets until
indicator is below red.
Continue100%Jam
Proof Shredding
If a misfeed
occurs:
If
illuminates after paper has been
reversed, press reverse and remove paper.
Otherwise, regular shredding will resume.
1 2 3
Up to RED: Too many
sheets have been inserted.
Up to GREEN: More sheets
can be added.
Up to YELLOW: Productivity
is optimized.
All indicators light up and
shredderpausesfor3-6seconds
Wait for flashing to stop after automatic correction
is complete. Regular shredding will resume.
15
15
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
TO CLEAN THE SENSORS
CLEANING AUTO-START INFRARED SENSORS
BASIC PRODUCT MAINTENANCE AND TROUBLESHOOTING
Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors
may become blocked by paper dust causing the motor to run even if there is no paper present
(Note: two paper detection sensors are located in the center of the paper entry).
Allmicro-cutshreddersrequireoilforpeakperformance.Ifnotoiled,a
machine may experience diminished sheet capacity, intrusive noise when
shredding and could ultimately stop running. To avoid these problems, we
recommend you oil your shredder each time you empty your waste bin.
OILING SHREDDER
3
Turn off and unplug
shredder
LocateAuto-start
infared sensor
Using cotton swab, wipe
away any contamination
from the paper sensors
Dip cotton swab in
rubbing alcohol
AUTO AUTO AUTO
1
MS-470C
2 4
3 4
MS-470C
SAFESENSE
®
TECHNOLOGY OPERATION
WHEN IN SLEEP MODE
SLEEP MODE
1
3
In sleep mode
To get out of sleep mode
touch control panel
insert paperor
AUTO AUTO AUTO
2
SET-UP AND TESTING
Turn the shredder ON
( ) to activate SafeSense
®
Touch test area and
look for the SafeSense
®
indicator to illuminate
SafeSense
®
is active and
working properly
If hand is held on SafeSense
®
area more than 2 seconds
Shredder will shut off
AUTO AUTO AUTO
1
2
PREVENTIVE MAINTENANCE AND MISCELLANEOUS TROUBLESHOOTING
•SelfCleaningCycle:Shredderperiodicallycyclesinforwardandreverselasting3-6seconds.
•Emptywastebasketwhenbinfullindicatorlightsup.
•Shredderwon’trunifthedoorisopen,orbinneedstobeemptied.Bin must be in machine, with door closed, in order for machine to operate properly.
•Maintenanceisanimportantpartofprotectingyourinvestment.Don’tforgetouroil(35250)andshredderbags(36054).
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
AUTO
3
Press and hold reverse
()2-3seconds
MS-470C
2
*Applyoilacrossentry
Turn off and unplug
shredder
AUTO
1
 previous