3
Product Profile
This product is built to shred
p a p e r, staples, small paper clips
and credit cards
. It is n o t built to take large paper clips, con-
tinuous forms, adhesive labels, transparencies, newspaper,
cardboard or any plastic other than credit cards. Using it for
these purposes is likely to cause irreparable damage.
Strip-cut Confetti Cut
OD1200 OD1200C
Sheet capacity* 12 sheets 8 sheets
Paper shred size 7/32" 5/32" x 1-3/8"
(5.8 mm) (3.9 x 35 mm)
Maximum paper width 9" (229 mm)
Recommended daily capacity 25-50 shredding passes
Maximum running time 10-12 minutes
Automatic cool-down period 20 minutes
Voltage (120 V / 60 Hz) 2.5A 5.0 A
*Based on 20 lb., 8-1/2" x 11" (70gsm, A4) paper with shredder operating at rated voltage; heavier paper, high humid-
i t y, or other than rated voltage may reduce sheet capacity.
I M P O R T ANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING
While setting up shredder
•Check shredder for damage or defects; some paper particles in the basket are nor-
mal due to product testing and does not indicate a defect.
•If the cord is damaged do not replace cord or use the machine. Return machine for
a replacement.
•Avoid touching exposed blades on underside of OD1200C confetti-cut shredder
head.
•Plug power cord in an outlet that can easily be reached.
•Do not place shredder near or over a heat or water source.
While operating shredder
•Keep hands and hanging objects (jewelry, ties, loose clothing,
long hair, etc.) away from paper entry.
•Keep children and pets away from the shredder.
When not in use
•Always turn off and unplug shredder
•Unplug before emptying basket
•Do not open shredder head: Danger of electric shock.
N O T E:
Do not use flammable synthetic oil, petroleum-based prod-
ucts
or aerosols of any kind on or near product at any time.