Filter
Top Products
Click the right-side button again and the Opti Track will return to
operating as an optical mouse. While operating as an optical
mouse, the trackball will function as a scroll wheel.
TROUBLESHOOTING
The Fellowes Opti Trac does not work after installation or
is not detected:
• Check all connections to be sure they are secured to the correct
ports, and then restart the computer.
• Make sure the PS/2 mouse port has the proper configuration.
Refer to your computer documentation for the correct port
configuration. You may also have other system devices that
conflict with the mouse. Check the IRQ/address settings of
these devices for conflicts, and change the settings as required.
• If using as a PS/2 mouse,make sure that the BIOS setting on
the connect port of your computer shows Enable. Refer to your
computer document for the correct port configuration.
The screen cursor does not track well or the cursor does not
move:
• The optical sensor on the mouse will not function on a highly-
reflective surface such as glass, a mirror or some black
surfaces. Hence, the surface of your desktop may be interfering
with the performance of the input device. Utilize a traditional
mouse pad or use the mouse on a different surface.
7