Filter
Top Products
1
KEY
CAPABILITIES
ENGLISH
Model P-48C
Will shred: Paper, credit cards, paper clips and staples
Will not shred: Continuous forms, CD/DVDs, adhesive labels, transparencies, newspaper,
cardboard, laminatess, X-rays or plastic other than noted above
Paper shred size:
Cross-Cut ......................................................................5/32 in. x 2 in. (3.9mm x 50mm)
Maximum:
Sheets per pass ............................................................................................................. 8*
Cards per pass ............................................................................................................... 1*
Paper entry width .................................................................................8 3/4 in. (225mm)
* 8.5 in. x11 in., 20 lb., (75g) paper at 120V/60 Hz, 3.0Amps; heavier paper, humidity
or other than rated voltage may reduce capacity. Recommended maximum daily usage
rates: 10-20 paper passes; 10 cards. 8 sheets per pass.
J. Control switch and LEDs
I 1. Auto-On (green)
O 2. OFF
R 3. Reverse
15
4. Overheat (red)
A. Shredder head
B. Handle
C. Safety lock
D. Window
E. Bin
F. Disconnect power switch
G. Paper/card entry
H. See safety instructions
I. Sheet capacity guage
F.
G.
H.
I.
J.
15
15
15
• Keep away from children and pets. Keep hands away from paper entry.
Always set to off or unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away
from shredder openings. If object enters top opening, switch to
Reverse (R) to back out object.
• Never use aerosol products, petroleum based lubricants or other flammable
products on or near shredder. Do not use canned air on shredder.
• Do not use if damaged or defective. Do not disassemble shredder. Do
not place near or over heat source or water.
• This shredder has a Disconnect Power Switch (F) that must be in the ON (I)
position to operate shredder. In case of emergency, move switch to OFF (O)
position. This action will stop shredder immediately.
• Avoid touching exposed cutting blades under shredder head.
• Do not put foreign objects in paper entry.
• Shreddermustbepluggedintoaproperlygroundedwalloutletorsocketof
the voltage and amperage designated on the label. The grounded outlet or
socket must be installed near the equipment and easily accessible. Energy
converters, transformers, or extension cords should not be used with this product.
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
15
B.
C.
A.
E.
D.
C. Safety lock
To set lock, push down and slide