Filter
Top Products
TROUBLESHOOTING LIMITED WARRANTY
Fellowes warrants all the cutting cylinders of the
machine to be free of defects in material and
workmanship for 3 years from the date of
purchase by the original consumer. Fellowes
warrants all other parts of the machine to be free
of defects in material and workmanship for 1 year
from the date of purchase by the original con-
sumer. If any part is found to be defective during
the warrant period, your sole and exclusive
remedy will be repair or replacement, at FellowesÕ
option and expense, of the defective part.
This warranty does not apply in cases of abuse,
mishandling or unauthorized repair. ANY
IMPLIED WARRANTY, INCLUDING THAT OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, IS HEREBY LIMITED
IN DURATION TO THE APPROPRIATE
WARRANTY PERIOD SET FORTH ABOVE.
In no event shall Fellowes be liable for any
consequential or incidental damages attributable
to this product. This warranty gives you specific
legal rights. You may have other legal rights that
vary from state to state.
For more detail or to obtain service under this
warranty, please contact Fellowes Customer
Service at 1-800-955-0959, Monday through
Friday, 8 AM - 5 PM (Central Standard Time).
For specific instructions on obtaining service
under this warranty on machines purchased out-
side the USA, contact the appropriate location
listed in the Contact for Service section of this
instruction manual.
Warrantor: Fellowes Manufacturing Company.
a. Shredder is not plugged in.
b. Power switch is in the OFF (O)
position. Move switch to AUTO (I)
position.
c. Shredder is jammed. See
"Clearing a Jam" section.
d. Shredder has exceeded the maxi-
mum run time and requires a
"cool-down" time. See "Product
Usage Guide" on front panel.
e. Shredder is not assembled prop-
erly. See "Assembly."
a. Cutting blades need to be oiled
REGULARLY. See "MAINTE-
NANCE" section.
a. Shredder has exceeded the maxi-
mum run time and requires a
"cool-down" time. See "Product
Usage Guide" on front panel.
b. Shredder is jammed. See
"OPERATION - Clearing a Jam."
a. Cutting blades need to be oiled
REGULARLY. See "MAINTE-
NANCE" section.
a. Shredder is not assembled prop-
erly. See "ASSEMBLY."
a. A small piece of paper may be
blocking the auto-start sensor of
this shredder. Move the power
switch to the OFF (O) position and
unplug the shredder. Turn shred-
der over and use a toothpick
(from the underside of the unit)
to clear the paper blockage at the
auto-start sensor (center) location.
a. A small piece of paper may be
causing the auto-start feature to
run continuously. Move the power
switch to the OFF (O) position and
unplug the shredder. Use a
toothpick (from the top of the
unit) to clear the paper blockage
at the auto-start sensor (center)
location.
a. This is normal. The shredder runs
a few seconds longer than the
paper in order to keep the cutters
clear of paper particles and reduce
the chances of a jam.
Shredder will not
operate.
Shredder makes a
loud squeaking or
rubbing noise.
Shredder suddenly
stops while
shredding.
Shredder shreds
less than capacity.
Red LED is lit.
Shredder operates
only in REVERSE.
Shredder runs con-
tinuously when in
AUTO.
Shredder runs for a
few seconds after
the paper has
cleared the cutters.
Australia Benelux Canada France Germany Italy Japan Poland United Kingdom
Tullamarine, Vic Vianen, NL Markham, Ont. Rennes, I-V Garbsen, Han. Camerano, AN Tokyo Warsaw Doncaster, S. Yorks.
®
© 2001 Fellowes Printed in China. Form No. 30117
1789 Norwood Avenue ¥ Itasca, Illinois 60143-1095
630-893-1600
Customer Service 1-800-955-0959
www.fellowes.com