Filter
Top Products
Switch the power on.
Insert document to trim. Use the document gauge at
the sides of the cutting base to check that items do not
exceed maximum capacity.
Use transparent window with orange trimline guide to
quickly and accurately align your cuts. Align cut line
with the outer edge of the orange trimline. For best
results, mark the exact cut position on the item before
trimming and try trimming a test sheet.
Alternatively, align item with the cut dimensions on the
base of the trimmer.
Secure document with SafeCut™ Clamp, the Cut-
Control LED touch pad will light up blue.
To trim press the Cut-Control LED touch pad. When
touched, the Cut-Control LED will light up in pink and
then turn flashing blue when it is cutting.
PowerTrim will complete 3 cut cycles (of 6 cuts) for
cutting max 30 sheets (20lb). To stop cutting press the
Cut-Control LED touch pad.
Release clamping mechanism again before removing
items from cutting bed.
3.
4.
5.
6.
7.
STEPS TO TRIM
6
Ensure the machine is on a stable surface. Check that
there is enough clear space behind the machine to allow
trimmed items to pass through freely.
Connect the supplied power lead to the machine.
Plug the power lead in to an easily accessible main
socket. Switch the main supply on.
1. 2.
BEFORE TRIMMING
9.
10.
11.
8.