Filter
Top Products
A
B
C
D
E
F
2
Safety Instructions
• Read and save these instructions.
• Follow all warnings and instructions marked on the product.
• Always turn off and unplug the machine before moving, cleaning, or conduct other than normal operation.
• Operate shredder from the power source indicated on the serial label or power supply. If you are not sure of the
type of power available, consult your dealer or a power company.
• Power cord should be easily accessible because it serves as the disconnect switch. If the power cord is damaged,
call the number listed under “Contact for Service”.
• If the shredder does not come with a wastebasket, be certain the basket you select provides a stable base for the
shredder. Tall or narrow baskets may be top heavy and unstable.
• Keep loose objects (jewelry, ties, long hair) away from shredder.
• CAUTION: Do not insert aerosol cleaners or lubricants into or around the machine. Some agents may combust,
causing serious injury.
• Empty wastebasket frequently.
• Do not place shredder near water, over a radiator or a heat register.
• Do not rest anything on the power cord. Do not place machine where people will walk on the cord.
• The use of an extension cord is not recommended.
• Do not service this product yourself. An opened cover may expose you to dangerous voltage points or other risks,
and will void manufacturer’s warranty.
• Do not exceed recommended sheet capacity or usage. (See “Sheet Capacity and Usage”, Table A).
• Do not shred continuous forms.
• Do not shred labels, transparencies, glossy paper, newsprint, plastic or cardboard.
• Keep out of the reach of children and pets.
• Never insert your hand or fingers into feed opening.
• Practice caution when shredding paper that contains paper clips and staples. Shredder is intended for paper only,
although clips and staples will not harm the cutting system nor void the 5 year cutter warranty, but the added
thickness may decrease sheet capacity.
Installation
All Models
• Where applicable, plug power cord into jack on the unit.
• Position shredder securely on basket.
• Plug power cord into a standard AC outlet with the appropriate power requirements as
stated on the serial number label adhered to the bottom of the shredder.
PS25
PS30
PS50
Fits wastebaskets from 13 1/4” - 16 1/2” (337 - 419mm) wide.
• Position shredder securely over basket and extend adjustable arm so shredder solidly rests
on basket edges.