5
ENGLISH
Maintenance
Regular emptying of the basket
is important to ensure the smooth operation of the cutting
cylinders. If you can see paper in the basket window (8), turn off the shredder, pull out basket
and empty basket contents.
Regular oiling of the shredder
is also necessary to ensure proper performance.
If you are running the shredder at or near capacity, we recommend oiling it
month-
ly
. Using Fellowes Powershred Lubricant #35250 or other non-aerosol vegetable-
based oil in a long-nozzle container:
• Apply oil over full width of paper entry (1) with shredder in off [O] position.
• Press control switch to automatic [I] position which will cause shredder to run for about 2
seconds.
• Press and hold control switch in reverse [R] position for 3–5 seconds.
• Repeat above automatic [I] and reverse [R] sequence three times.
REMINDER:
Do not use flammable synthetic oil, petroleum-based products or
aerosol lubricants of any kind in or near the shredder at any time.
Troubleshooting
If you have a problem with your shredder, check the symptoms and remedies below. If you
cannot solve the problem this way, contact Fellowes Customer Service.
Do not open
shredder head
to attempt repair: It could expose you to serious electric shock and will void
your warranty.
Symptom
Shredder does not start or stops while
shredding.
Shredder squeaks, grinds or runs below
capacity.
Shredder continues to run for a few seconds
after paper has cleared the cutting cylinders.
Remedy
• Make sure shredder is plugged in and
switch is in automatic [I] position.
• If paper appears to be jammed, follow
instructions under
Operation
.
• Check basket position; basket must be
pushed all the way in the cabinet. Follow
instructions under
Set-Up
.
• Wait 15 minutes for shredder to cool down
before trying again.
• Oil cutting cylinders. Follow instructions
under
Maintenance
.
• Check window. If paper is visible, empty
basket. Follow instructions under
Maintenance
.
No action required. This is a self-cleaning
function.