Fellowes S5 Paper Shredder User Manual


 
2
IMPORTANT SAFEGUARDS
NEVER insert hands or fingers into paper entry as serious personal
injury may result.
THIS MACHINE IS NOT A TOY. Keep children and pets away from
shredder AT ALL TIMES as serious injury may result. Always unplug
shredder when not in use.
Keep loose objects (jewelry, ties, long hair) away from shredder.
These items and others like them may cause serious injury if they
accidentally fall into the paper entry.
Model FS5 is not supplied with a basket. When selecting a basket,
make certain the basket provides a stable base for the shredder.
High, narrow baskets may create an unstable, top-heavy situation.
Do not exceed recommended sheet capacity.
Do not shred plastic, continuous forms, adhesive labels, transparen-
cies, newsprint, or cardboard.
This personal shredder is intended for paper only. Do not attempt
to shred paper clips or other hard materials (except staples).
Do not place shredder near or over a heat source or water.
Always turn off and unplug unit before moving or cleaning and
when not in use.
Do not insert aerosol cleaners or lubricants into or around the
shredder. Some agents may combust, causing serious injury.
Do not use this product if it or the cord has been damaged in any
way.
Do not open the cover for any reason. Doing so can expose you to
dangerous voltages and will void your warranty.
Power Cord Care
Place power cord in an easily accessible position, because it is the
main disconnect switch.
Do not place machine where adults, children or animals may walk
on the cord.
Do not rest anything on the power cord.
If an extension cord is used, be sure that all products plugged into
the extension cord do not exceed the extension cord ampere rat-
ing.
®
Figure 1
®
A. Paper entry
B. Basket (Model FS5+,
SC5+ only)
C. Power switch
D. Auto-start sensor
E. Shredder head
A
B
E
D
C
PARTS OF THE SHREDDER
ASSEMBLY
NOTE: For assembly of Model FS5+, simply place shredder head onto
supplied basket. No adjustments
are necessary.
To adjust and fit Model FS5 shredder head onto basket:
1. Position shredder head over basket. Extend adjustable arm to fit
width of basket as shown in Figure 1.
2. Lower shredder head onto basket so that adjustable arm fits over
the rim of the basket.