Filter
Top Products
FS-8700-52 Notifier AM6000 Driver Manual
FieldServer Technologies 1991 Tarob Court, Milpitas, California 95035 (408) 262-2299 fax: (408) 262-9042
Visit our website: www.fieldserver.com E-mail: support@fieldserver.com
Page 6
4.4 Client Side Map Descriptors
4.4.1 FieldSe rver Specific Map Descriptor Parameters
Column Title Function Legal Values
Map_Descriptor_Name Name of this Map Descriptor Up to 32 alphanumeric characters
Data_Array_Name Name of Data Array where data is
to be stored in the FieldServer
One of the Data Array names from
“Data Array” section above
Data_Array_Location Starting location in Data Array 0 to maximum specified in “Data
Array” section above
Function Function of Client Map Descriptor Passive
4.4.2 Driver Specific Map Descriptor Parameters
Column Title Function Legal Values
Node_Name Name of Node to fetch data from One of the node names
specified in “Client
Node Descriptor” above
Data_Type Data type Register, Coil, AI, DI
Length Length of Map Descriptor. This value is important
when a 'Block Ack' message is received as it tells
the driver how much of the data array to zeroise.
1 - 1000
Address Loop/Device Address
In the format mmnn where mm is the loop number
and nn is the device number. Together they forma a
composite device number.
501, 302
AM6000 Driver
specific parameters &
keywords.
Am6000_typeID Used to differentiate between device and system
type messages.
Device-only,
System_trbl,
device&type.
system-Styl2,
catch-all
Additional notes are
provided in section 5.1
Am6000_Status Allows direction of alarm or trouble states to
different data arrays.
Any, Alarm, trouble,
erase, on , eraseon
Additional notes are
provided in section 5.2
AM6000_Ackable Tells the driver that the data area of this mapdesc
must be Zeroised when a block ack is received.
Additional notes are
provided in section 5.3
Am6000_simulation Provided for debugging and test purposes only.
Tells the driver which debug message to send. This
parameter is for use by FieldServer Technologies
only.