Filter
Top Products
FS-8700-70 WS3000 Tabs Manual Page 9 of 14
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
4.4.4. Map Descriptor Example 1
// Client Side Map Descriptors
Map Descriptors
Map_Descriptor_Name, Scan_Interval, Data_Array_Name, Data_Array_Offset, Function, node_name
Point_data_0, 1.0s, Points_0, 0, rdbc, Tabs_0
This can be any
name but each
name must be
unique. Name will
appear in
FieldServer Map
Descriptor status
information screens.
The rate
at which
the TABS
device will
be polled.
The Data Array name
must be one found
under Data_Arrays. Data
from the scan will be
stored in the array at
Data_Array_Offset.
This value
specifies the offset
into the Data Array
where the data
fetched will be
stored.
Only a read
function
allowed i.e.
Data to be
read from the
TABS device.
Node name must be one
found under Nodes,
Node_name The
node_name identifies
the station address of
the TABS device ( 0-31).