Filter
Top Products
FS-8704-09 SNMP Driver Manual Page 5 of 39
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 9042 Toll Free: (888) 509 1970 email: support@fieldserver.com
3. Hardware Connections
The FieldServer is connected to the Ethernet using the UTP cable supplied. Two typical hardware
configurations are shown below:
1. FieldServer as SNMP Agent (Server)
2. FieldServer as SNMP Client
3.1. Hardware Connection Tips / Hints
The FieldServer utility program Ruinet will connect to the FieldServer even if the Netmask setting on
the PC differs from the setting on the FieldServer. SNMP will only work between Nodes for which
these settings correspond, however, thus all Nodes required to communicate using SNMP must have
the same Netmask setting.
Network
Management
Station
FieldServer SNMP
Agent/Server
TCP/IP Cloud
3
rd
Party
Nodes
(non-SNMP)
FieldServer
(SNMP Client)
TCP/IP Cloud
Managed Nodes
(SNMP Agents)
SCADA
(3
rd
Party Client)