Filter
Top Products
SlotServer Start-Up Guide Page 13 of 14
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
Appendix C. Vendor Information
Appendix C.1. Installing SlotServer on a Remote Rack using CNB Cards
1
Appendix C.1.1. Hardware and Software requirements
Two 1756 racks, one containing the CPU and the other the SlotServer
Two Controlnet CNB cards with connection cables to connect the racks to one other
RSlinx
RSLogix
RSNetworx
SlotServer EDS file (Available on SlotServer CD, or call Technical Support)
Appendix C.1.2. Setup
Install the CPU and the first CNB card in the local rack.
Install the second CNB card and the SlotServer in the remote rack.
Connect the ControlNet Network
Power up the racks
Install the SlotServer EDS File using the RSLinx Hardware EDS Installation Tool.
Make sure the SlotServer has a valid configuration loaded. The default configuration shipped with the
SlotServer should suffice.
Refer to the SlotServer Configuration Manual for further information.
1
The principles for connecting other 1756 bridging cards to the SlotServer are similar.